OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Wed Feb 21 17:38:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
+ set -e
+ dnf clean all
0 files removed
+ useradd -d /builddir mockbuild
+ su -c 'mkdir /builddir/build' mockbuild
+ echo '%_topdir /builddir/build'
+ su -c 'rpm -i /var/tmp/libuv-1.10.1-1.fc25.src.rpm' mockbuild
+ dnf -y builddep /builddir/build/SPECS/libuv.spec
Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA
Local RPMS 8% [=- ] 3.1 MB/s | 959 kB 00:03 ETA
Local RPMS 15% [=== ] 3.1 MB/s | 1.8 MB 00:03 ETA
Local RPMS 25% [===== ] 3.1 MB/s | 2.9 MB 00:02 ETA
Local RPMS 34% [======- ] 3.1 MB/s | 4.0 MB 00:02 ETA
Local RPMS 44% [========- ] 3.2 MB/s | 5.0 MB 00:02 ETA
Local RPMS 53% [==========- ] 3.2 MB/s | 6.1 MB 00:01 ETA
Local RPMS 59% [===========- ] 3.0 MB/s | 6.7 MB 00:01 ETA
Local RPMS 67% [=============- ] 3.0 MB/s | 7.7 MB 00:01 ETA
Local RPMS 76% [=============== ] 3.0 MB/s | 8.8 MB 00:00 ETA
Local RPMS 85% [================= ] 3.0 MB/s | 9.8 MB 00:00 ETA
Local RPMS 94% [==================- ] 3.1 MB/s | 11 MB 00:00 ETA
Local RPMS 2.5 MB/s | 11 MB 00:04
Last metadata expiration check: 0:01:20 ago on Wed Feb 21 17:38:34 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
autoconf noarch 2.69-26.fc28 local 709 k
automake noarch 1.15.1-3.fc28 local 706 k
libtool riscv64 2.4.6-21.fc27 local 707 k
Installing dependencies:
emacs-filesystem noarch 1:25.3-5.fc28 local 67 k
m4 riscv64 1.4.18-5.fc28 local 369 k
perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k
perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k
perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M
perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k
perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k
perl-File-Path noarch 2.15-1.fc27 local 37 k
perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k
perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k
perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k
perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k
perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k
perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k
perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k
perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k
perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k
perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k
perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k
perl-Socket riscv64 4:2.027-1.fc27 local 95 k
perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k
perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k
perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k
perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k
perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k
perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k
perl-Time-Local noarch 1:1.250-394.fc27 local 30 k
perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k
perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k
perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M
perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M
perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k
perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k
perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k
perl-threads riscv64 1:2.21-1.fc27 local 104 k
perl-threads-shared riscv64 1.58-1.fc27 local 91 k
tar riscv64 2:1.29-7.fc27 local 805 k
Transaction Summary
================================================================================
Install 40 Packages
Total download size: 18 M
Installed size: 54 M
Downloading Packages:
(1/40): autoconf-2.6 0% [ ] --- B/s | 0 B --:-- ETA
(1/40): emacs-filesystem-25.3-5.fc28.noarch.rpm 614 kB/s | 67 kB 00:00
(2-3/40): automake-1 1% [ ] 1.7 MB/s | 227 kB 00:10 ETA
(2-4/40): automake-1 6% [= ] 1.7 MB/s | 1.1 MB 00:09 ETA
(2/40): autoconf-2.69-26.fc28.noarch.rpm 865 kB/s | 709 kB 00:00
(3-4/40): libtool-2. 11% [== ] 1.8 MB/s | 2.1 MB 00:08 ETA
(3/40): automake-1.15.1-3.fc28.noarch.rpm 814 kB/s | 706 kB 00:00
(4/40): libtool-2.4. 11% [== ] 1.8 MB/s | 2.1 MB 00:08 ETA
(4/40): libtool-2.4.6-21.fc27.riscv64.rpm 737 kB/s | 707 kB 00:00
(5-6/40): tar-1.29-7 12% [==- ] 1.8 MB/s | 2.3 MB 00:08 ETA
(5/40): perl-Carp-1.42-408.fc27.0.riscv64.noarc 380 kB/s | 84 kB 00:00
(6-7/40): tar-1.29-7 12% [==- ] 1.7 MB/s | 2.3 MB 00:08 ETA
(6/40): perl-File-Path-2.15-1.fc27.noarch.rpm 662 kB/s | 37 kB 00:00
(7-8/40): tar-1.29-7 13% [==- ] 1.7 MB/s | 2.5 MB 00:08 ETA
(7/40): perl-Exporter-5.72-408.fc27.0.riscv64.n 476 kB/s | 87 kB 00:00
(8-9/40): tar-1.29-7 14% [==- ] 1.7 MB/s | 2.5 MB 00:08 ETA
(8/40): perl-Getopt-Long-2.50-3.fc27.noarch.rpm 472 kB/s | 61 kB 00:00
(9-10/40): tar-1.29- 14% [==- ] 1.7 MB/s | 2.7 MB 00:08 ETA
(9/40): perl-Thread-Queue-3.12-408.fc27.0.riscv 587 kB/s | 77 kB 00:00
(10-11/40): tar-1.29 15% [=== ] 1.7 MB/s | 2.8 MB 00:08 ETA
(10/40): perl-constant-1.33-408.fc27.0.riscv64. 585 kB/s | 79 kB 00:00
(11-12/40): tar-1.29 16% [=== ] 1.7 MB/s | 2.9 MB 00:08 ETA
(11/40): perl-Errno-1.28-408.fc28.1.riscv64.ris 528 kB/s | 73 kB 00:00
(12-13/40): tar-1.29 16% [=== ] 1.7 MB/s | 3.0 MB 00:08 ETA
(12-14/40): perl-int 21% [==== ] 1.8 MB/s | 3.9 MB 00:07 ETA
(12/40): tar-1.29-7.fc27.riscv64.rpm 631 kB/s | 805 kB 00:01
(13-14/40): perl-int 24% [====- ] 1.8 MB/s | 4.4 MB 00:07 ETA
(13/40): perl-IO-1.38-408.fc28.1.riscv64.riscv6 876 kB/s | 176 kB 00:00
(14-15/40): perl-int 27% [===== ] 1.8 MB/s | 4.9 MB 00:07 ETA
(14/40): perl-PathTools-3.67-408.fc27.0.riscv64 865 kB/s | 166 kB 00:00
(15-16/40): perl-int 30% [====== ] 1.8 MB/s | 5.4 MB 00:06 ETA
(15/40): perl-threads-2.21-1.fc27.riscv64.rpm 862 kB/s | 104 kB 00:00
(16-17/40): perl-int 32% [====== ] 1.9 MB/s | 5.8 MB 00:06 ETA
(16/40): perl-Text-ParseWords-3.30-408.fc27.0.r 804 kB/s | 73 kB 00:00
(17-18/40): perl-int 33% [======- ] 1.9 MB/s | 6.0 MB 00:06 ETA
(17-19/40): perl-int 38% [=======- ] 1.9 MB/s | 6.9 MB 00:05 ETA
(17/40): m4-1.4.18-5.fc28.riscv64.rpm 918 kB/s | 369 kB 00:00
(18-19/40): perl-lib 39% [=======- ] 1.9 MB/s | 7.1 MB 00:05 ETA
(18/40): perl-Data-Dumper-2.167-408.fc27.0.risc 868 kB/s | 149 kB 00:00
(19-20/40): perl-lib 42% [======== ] 1.9 MB/s | 7.5 MB 00:05 ETA
(19/40): perl-Text-Tabs+Wrap-2013.0523-408.fc27 846 kB/s | 80 kB 00:00
(20-21/40): perl-lib 43% [========- ] 1.9 MB/s | 7.8 MB 00:05 ETA
(20/40): perl-parent-0.236-408.fc27.0.riscv64.n 755 kB/s | 71 kB 00:00
(21-22/40): perl-lib 44% [========- ] 1.9 MB/s | 8.0 MB 00:05 ETA
(21/40): perl-Scalar-List-Utils-1.48-1.fc27.ris 850 kB/s | 119 kB 00:00
(22-23/40): perl-int 46% [========= ] 1.9 MB/s | 8.4 MB 00:05 ETA
(22/40): perl-Unicode-Normalize-1.25-408.fc27.0 882 kB/s | 164 kB 00:00
(23-24/40): perl-int 49% [=========- ] 1.9 MB/s | 8.9 MB 00:04 ETA
(23/40): perl-macros-5.26.1-408.fc28.1.riscv64. 746 kB/s | 69 kB 00:00
(24-25/40): perl-int 50% [========== ] 1.9 MB/s | 9.1 MB 00:04 ETA
(24/40): perl-threads-shared-1.58-1.fc27.riscv6 858 kB/s | 91 kB 00:00
(25-26/40): perl-int 52% [========== ] 1.9 MB/s | 9.4 MB 00:04 ETA
(25/40): perl-Socket-2.027-1.fc27.riscv64.rpm 848 kB/s | 95 kB 00:00
(26-27/40): perl-int 53% [==========- ] 1.9 MB/s | 9.7 MB 00:04 ETA
(26/40): perl-Pod-Usage-1.69-408.fc27.0.riscv64 807 kB/s | 89 kB 00:00
(27-28/40): perl-int 55% [=========== ] 1.9 MB/s | 9.9 MB 00:04 ETA
(27/40): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 920 kB/s | 139 kB 00:00
(28-29/40): perl-lib 57% [===========- ] 1.9 MB/s | 10 MB 00:03 ETA
(28/40): perl-podlators-4.09-408.fc27.0.riscv64 916 kB/s | 157 kB 00:00
(29-30/40): perl-lib 60% [============ ] 1.9 MB/s | 11 MB 00:03 ETA
(29/40): perl-File-Temp-0.230.400-408.fc27.0.ri 847 kB/s | 103 kB 00:00
(30-31/40): perl-lib 62% [============ ] 2.0 MB/s | 11 MB 00:03 ETA
(30/40): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 814 kB/s | 97 kB 00:00
(31-32/40): perl-lib 63% [============- ] 2.0 MB/s | 11 MB 00:03 ETA
(31/40): perl-Pod-Simple-3.35-408.fc27.0.riscv6 950 kB/s | 271 kB 00:00
(32-33/40): perl-lib 68% [=============- ] 2.0 MB/s | 12 MB 00:02 ETA
(32/40): perl-libs-5.26.1-408.fc28.1.riscv64.ri 710 kB/s | 3.3 MB 00:04
(33-34/40): perl-Enc 70% [============== ] 1.9 MB/s | 13 MB 00:02 ETA
(33/40): perl-Time-Local-1.250-394.fc27.noarch. 736 kB/s | 30 kB 00:00
(34-35/40): perl-Enc 70% [============== ] 1.9 MB/s | 13 MB 00:02 ETA
(34/40): perl-MIME-Base64-3.15-408.fc27.0.riscv 895 kB/s | 111 kB 00:00
(35-36/40): perl-Enc 72% [==============- ] 1.9 MB/s | 13 MB 00:02 ETA
(35/40): perl-Storable-2.62-408.fc27.0.riscv64. 919 kB/s | 205 kB 00:00
(36-37/40): perl-Enc 76% [=============== ] 1.9 MB/s | 14 MB 00:02 ETA
(36/40): perl-Term-ANSIColor-4.06-408.fc27.0.ri 869 kB/s | 94 kB 00:00
(37-38/40): perl-Enc 77% [===============- ] 1.9 MB/s | 14 MB 00:02 ETA
(37/40): perl-Term-Cap-1.17-408.fc27.0.riscv64. 845 kB/s | 78 kB 00:00
(38-39/40): perl-int 79% [===============- ] 1.9 MB/s | 14 MB 00:01 ETA
(38/40): perl-Pod-Escapes-1.07-408.fc27.0.riscv 837 kB/s | 77 kB 00:00
(39-40/40): perl-int 80% [================ ] 1.9 MB/s | 14 MB 00:01 ETA
(39-40/40): perl-int 85% [================= ] 2.0 MB/s | 15 MB 00:01 ETA
(39/40): perl-Encode-2.94-16.fc27.riscv64.rpm 746 kB/s | 1.4 MB 00:01
(40/40): perl-interp 88% [=================- ] 1.9 MB/s | 16 MB 00:01 ETA
(40/40): perl-interp 93% [==================- ] 2.0 MB/s | 17 MB 00:00 ETA
(40/40): perl-interp 98% [===================-] 2.1 MB/s | 18 MB 00:00 ETA
(40/40): perl-interpreter-5.26.1-408.fc28.1.ris 903 kB/s | 6.7 MB 00:07
--------------------------------------------------------------------------------
Total 1.8 MB/s | 18 MB 00:09
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [== ] 1/1
Preparing : [=== ] 1/1
Preparing : [===== ] 1/1
Preparing : [====== ] 1/1
Preparing : [======= ] 1/1
Preparing : [======== ] 1/1
Preparing : [========== ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============= ] 1/1
Preparing : [=============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================= ] 1/1
Preparing : [================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [===================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================= ] 1/1
Preparing : [========================= ] 1/1
Preparing : [========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================= ] 1/1
Preparing : [============================== ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================= ] 1/1
Preparing : [================================== ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [==================================== ] 1/1
Preparing : [====================================== ] 1/1
Preparing : [======================================= ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================= ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================= ] 1/1
Preparing : [============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : [================================================= ] 1/1
Preparing : 1/1
Installing : perl-Exporter-5.72-408.f [ ] 1/40
Installing : perl-Exporter-5.72-408.f [===== ] 1/40
Installing : perl-Exporter-5.72-408.f [======= ] 1/40
Installing : perl-Exporter-5.72-408.f [==================== ] 1/40
Installing : perl-Exporter-5.72-408.f [======================== ] 1/40
Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/40
Installing : perl-libs-4:5.26.1-408.f [ ] 2/40
Installing : perl-libs-4:5.26.1-408.f [= ] 2/40
Installing : perl-libs-4:5.26.1-408.f [== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [=== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [==== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [===== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [====== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [======= ] 2/40
Installing : perl-libs-4:5.26.1-408.f [======== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [========= ] 2/40
Installing : perl-libs-4:5.26.1-408.f [========== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [============ ] 2/40
Installing : perl-libs-4:5.26.1-408.f [============= ] 2/40
Installing : perl-libs-4:5.26.1-408.f [============== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [================ ] 2/40
Installing : perl-libs-4:5.26.1-408.f [================= ] 2/40
Installing : perl-libs-4:5.26.1-408.f [================== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/40
Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/40
Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/40
Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/40
Installing : perl-Carp-1.42-408.fc27. [ ] 3/40
Installing : perl-Carp-1.42-408.fc27. [==== ] 3/40
Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/40
Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/40
Installing : perl-Scalar-List-Utils-3 [ ] 4/40
Installing : perl-Scalar-List-Utils-3 [= ] 4/40
Installing : perl-Scalar-List-Utils-3 [== ] 4/40
Installing : perl-Scalar-List-Utils-3 [=== ] 4/40
Installing : perl-Scalar-List-Utils-3 [===== ] 4/40
Installing : perl-Scalar-List-Utils-3 [======== ] 4/40
Installing : perl-Scalar-List-Utils-3 [========== ] 4/40
Installing : perl-Scalar-List-Utils-3 [============= ] 4/40
Installing : perl-Scalar-List-Utils-3 [================ ] 4/40
Installing : perl-Scalar-List-Utils-3 [================== ] 4/40
Installing : perl-Scalar-List-Utils-3 [===================== ] 4/40
Installing : perl-Scalar-List-Utils-3 [====================== ] 4/40
Installing : perl-Scalar-List-Utils-3 [======================= ] 4/40
Installing : perl-Scalar-List-Utils-3 [======================== ] 4/40
Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/40
Installing : perl-Text-ParseWords-3.3 [ ] 5/40
Installing : perl-Text-ParseWords-3.3 [======= ] 5/40
Installing : perl-Text-ParseWords-3.3 [======================== ] 5/40
Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/40
Installing : perl-Term-ANSIColor-4.06 [ ] 6/40
Installing : perl-Term-ANSIColor-4.06 [==== ] 6/40
Installing : perl-Term-ANSIColor-4.06 [================== ] 6/40
Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/40
Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/40
Installing : perl-macros-4:5.26.1-408 [ ] 7/40
Installing : perl-macros-4:5.26.1-408 [======================== ] 7/40
Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/40
Installing : perl-constant-1.33-408.f [ ] 8/40
Installing : perl-constant-1.33-408.f [======= ] 8/40
Installing : perl-constant-1.33-408.f [======================== ] 8/40
Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 8/40
Installing : perl-Errno-1.28-408.fc28 [ ] 9/40
Installing : perl-Errno-1.28-408.fc28 [================= ] 9/40
Installing : perl-Errno-1.28-408.fc28 [======================== ] 9/40
Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 9/40
Installing : perl-File-Path-2.15-1.fc [ ] 10/40
Installing : perl-File-Path-2.15-1.fc [==== ] 10/40
Installing : perl-File-Path-2.15-1.fc [======== ] 10/40
Installing : perl-File-Path-2.15-1.fc [==================== ] 10/40
Installing : perl-File-Path-2.15-1.fc [======================== ] 10/40
Installing : perl-File-Path-2.15-1.fc27.noarch 10/40
Installing : perl-PathTools-3.67-408. [ ] 11/40
Installing : perl-PathTools-3.67-408. [== ] 11/40
Installing : perl-PathTools-3.67-408. [=== ] 11/40
Installing : perl-PathTools-3.67-408. [==== ] 11/40
Installing : perl-PathTools-3.67-408. [======= ] 11/40
Installing : perl-PathTools-3.67-408. [========= ] 11/40
Installing : perl-PathTools-3.67-408. [=========== ] 11/40
Installing : perl-PathTools-3.67-408. [============== ] 11/40
Installing : perl-PathTools-3.67-408. [================== ] 11/40
Installing : perl-PathTools-3.67-408. [==================== ] 11/40
Installing : perl-PathTools-3.67-408. [===================== ] 11/40
Installing : perl-PathTools-3.67-408. [====================== ] 11/40
Installing : perl-PathTools-3.67-408. [======================= ] 11/40
Installing : perl-PathTools-3.67-408. [======================== ] 11/40
Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 11/40
Installing : perl-threads-shared-1.58 [ ] 12/40
Installing : perl-threads-shared-1.58 [=== ] 12/40
Installing : perl-threads-shared-1.58 [======= ] 12/40
Installing : perl-threads-shared-1.58 [========== ] 12/40
Installing : perl-threads-shared-1.58 [============== ] 12/40
Installing : perl-threads-shared-1.58 [================= ] 12/40
Installing : perl-threads-shared-1.58 [==================== ] 12/40
Installing : perl-threads-shared-1.58 [======================= ] 12/40
Installing : perl-threads-shared-1.58 [======================== ] 12/40
Installing : perl-threads-shared-1.58-1.fc27.riscv64 12/40
Installing : perl-threads-1:2.21-1.fc [ ] 13/40
Installing : perl-threads-1:2.21-1.fc [=== ] 13/40
Installing : perl-threads-1:2.21-1.fc [====== ] 13/40
Installing : perl-threads-1:2.21-1.fc [========= ] 13/40
Installing : perl-threads-1:2.21-1.fc [============= ] 13/40
Installing : perl-threads-1:2.21-1.fc [================ ] 13/40
Installing : perl-threads-1:2.21-1.fc [================== ] 13/40
Installing : perl-threads-1:2.21-1.fc [===================== ] 13/40
Installing : perl-threads-1:2.21-1.fc [====================== ] 13/40
Installing : perl-threads-1:2.21-1.fc [======================= ] 13/40
Installing : perl-threads-1:2.21-1.fc [======================== ] 13/40
Installing : perl-threads-1:2.21-1.fc27.riscv64 13/40
Installing : perl-Text-Tabs+Wrap-2013 [ ] 14/40
Installing : perl-Text-Tabs+Wrap-2013 [=== ] 14/40
Installing : perl-Text-Tabs+Wrap-2013 [======== ] 14/40
Installing : perl-Text-Tabs+Wrap-2013 [========= ] 14/40
Installing : perl-Text-Tabs+Wrap-2013 [============== ] 14/40
Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 14/40
Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 14/40
Installing : perl-parent-1:0.236-408. [ ] 15/40
Installing : perl-parent-1:0.236-408. [============ ] 15/40
Installing : perl-parent-1:0.236-408. [======================== ] 15/40
Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 15/40
Installing : perl-Unicode-Normalize-1 [ ] 16/40
Installing : perl-Unicode-Normalize-1 [= ] 16/40
Installing : perl-Unicode-Normalize-1 [== ] 16/40
Installing : perl-Unicode-Normalize-1 [=== ] 16/40
Installing : perl-Unicode-Normalize-1 [==== ] 16/40
Installing : perl-Unicode-Normalize-1 [===== ] 16/40
Installing : perl-Unicode-Normalize-1 [====== ] 16/40
Installing : perl-Unicode-Normalize-1 [======= ] 16/40
Installing : perl-Unicode-Normalize-1 [======== ] 16/40
Installing : perl-Unicode-Normalize-1 [========= ] 16/40
Installing : perl-Unicode-Normalize-1 [========== ] 16/40
Installing : perl-Unicode-Normalize-1 [============ ] 16/40
Installing : perl-Unicode-Normalize-1 [============= ] 16/40
Installing : perl-Unicode-Normalize-1 [============== ] 16/40
Installing : perl-Unicode-Normalize-1 [=============== ] 16/40
Installing : perl-Unicode-Normalize-1 [================ ] 16/40
Installing : perl-Unicode-Normalize-1 [================= ] 16/40
Installing : perl-Unicode-Normalize-1 [================== ] 16/40
Installing : perl-Unicode-Normalize-1 [=================== ] 16/40
Installing : perl-Unicode-Normalize-1 [==================== ] 16/40
Installing : perl-Unicode-Normalize-1 [===================== ] 16/40
Installing : perl-Unicode-Normalize-1 [====================== ] 16/40
Installing : perl-Unicode-Normalize-1 [======================= ] 16/40
Installing : perl-Unicode-Normalize-1 [======================== ] 16/40
Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 16/40
Installing : perl-interpreter-4:5.26. [ ] 17/40
Installing : perl-interpreter-4:5.26. [= ] 17/40
Installing : perl-interpreter-4:5.26. [== ] 17/40
Installing : perl-interpreter-4:5.26. [=== ] 17/40
Installing : perl-interpreter-4:5.26. [==== ] 17/40random: crng init done
Installing : perl-interpreter-4:5.26. [===== ] 17/40
Installing : perl-interpreter-4:5.26. [====== ] 17/40
Installing : perl-interpreter-4:5.26. [======= ] 17/40
Installing : perl-interpreter-4:5.26. [======== ] 17/40
Installing : perl-interpreter-4:5.26. [========= ] 17/40
Installing : perl-interpreter-4:5.26. [========== ] 17/40
Installing : perl-interpreter-4:5.26. [=========== ] 17/40
Installing : perl-interpreter-4:5.26. [============ ] 17/40
Installing : perl-interpreter-4:5.26. [============= ] 17/40
Installing : perl-interpreter-4:5.26. [============== ] 17/40
Installing : perl-interpreter-4:5.26. [=============== ] 17/40
Installing : perl-interpreter-4:5.26. [================ ] 17/40
Installing : perl-interpreter-4:5.26. [================= ] 17/40
Installing : perl-interpreter-4:5.26. [================== ] 17/40
Installing : perl-interpreter-4:5.26. [=================== ] 17/40
Installing : perl-interpreter-4:5.26. [==================== ] 17/40
Installing : perl-interpreter-4:5.26. [===================== ] 17/40
Installing : perl-interpreter-4:5.26. [====================== ] 17/40
Installing : perl-interpreter-4:5.26. [======================= ] 17/40
Installing : perl-interpreter-4:5.26. [======================== ] 17/40
Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/40
Installing : perl-Socket-4:2.027-1.fc [ ] 18/40
Installing : perl-Socket-4:2.027-1.fc [=== ] 18/40
Installing : perl-Socket-4:2.027-1.fc [======= ] 18/40
Installing : perl-Socket-4:2.027-1.fc [========== ] 18/40
Installing : perl-Socket-4:2.027-1.fc [============== ] 18/40
Installing : perl-Socket-4:2.027-1.fc [================= ] 18/40
Installing : perl-Socket-4:2.027-1.fc [==================== ] 18/40
Installing : perl-Socket-4:2.027-1.fc [===================== ] 18/40
Installing : perl-Socket-4:2.027-1.fc [====================== ] 18/40
Installing : perl-Socket-4:2.027-1.fc [======================= ] 18/40
Installing : perl-Socket-4:2.027-1.fc [======================== ] 18/40
Installing : perl-Socket-4:2.027-1.fc27.riscv64 18/40
Installing : perl-IO-1.38-408.fc28.1. [ ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [= ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [=== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [==== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [===== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [====== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [======= ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [======== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [=========== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [============== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [================= ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [==================== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [===================== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [====================== ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [======================= ] 19/40
Installing : perl-IO-1.38-408.fc28.1. [======================== ] 19/40
Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/40
Installing : perl-File-Temp-0.230.400 [ ] 20/40
Installing : perl-File-Temp-0.230.400 [=== ] 20/40
Installing : perl-File-Temp-0.230.400 [============ ] 20/40
Installing : perl-File-Temp-0.230.400 [===================== ] 20/40
Installing : perl-File-Temp-0.230.400 [======================== ] 20/40
Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 20/40
Installing : perl-Storable-1:2.62-408 [ ] 21/40
Installing : perl-Storable-1:2.62-408 [== ] 21/40
Installing : perl-Storable-1:2.62-408 [==== ] 21/40
Installing : perl-Storable-1:2.62-408 [====== ] 21/40
Installing : perl-Storable-1:2.62-408 [======== ] 21/40
Installing : perl-Storable-1:2.62-408 [========== ] 21/40
Installing : perl-Storable-1:2.62-408 [============ ] 21/40
Installing : perl-Storable-1:2.62-408 [============== ] 21/40
Installing : perl-Storable-1:2.62-408 [================ ] 21/40
Installing : perl-Storable-1:2.62-408 [================== ] 21/40
Installing : perl-Storable-1:2.62-408 [==================== ] 21/40
Installing : perl-Storable-1:2.62-408 [====================== ] 21/40
Installing : perl-Storable-1:2.62-408 [======================== ] 21/40
Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 21/40
Installing : perl-MIME-Base64-3.15-40 [ ] 22/40
Installing : perl-MIME-Base64-3.15-40 [= ] 22/40
Installing : perl-MIME-Base64-3.15-40 [== ] 22/40
Installing : perl-MIME-Base64-3.15-40 [========== ] 22/40
Installing : perl-MIME-Base64-3.15-40 [================== ] 22/40
Installing : perl-MIME-Base64-3.15-40 [======================= ] 22/40
Installing : perl-MIME-Base64-3.15-40 [======================== ] 22/40
Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 22/40
Installing : perl-Term-Cap-1.17-408.f [ ] 23/40
Installing : perl-Term-Cap-1.17-408.f [==== ] 23/40
Installing : perl-Term-Cap-1.17-408.f [======================== ] 23/40
Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 23/40
Installing : perl-Pod-Escapes-1:1.07- [ ] 24/40
Installing : perl-Pod-Escapes-1:1.07- [==== ] 24/40
Installing : perl-Pod-Escapes-1:1.07- [======================== ] 24/40
Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 24/40
Installing : perl-Time-Local-1:1.250- [ ] 25/40
Installing : perl-Time-Local-1:1.250- [= ] 25/40
Installing : perl-Time-Local-1:1.250- [===== ] 25/40
Installing : perl-Time-Local-1:1.250- [======== ] 25/40
Installing : perl-Time-Local-1:1.250- [========= ] 25/40
Installing : perl-Time-Local-1:1.250- [================= ] 25/40
Installing : perl-Time-Local-1:1.250- [=================== ] 25/40
Installing : perl-Time-Local-1:1.250- [======================== ] 25/40
Installing : perl-Time-Local-1:1.250-394.fc27.noarch 25/40
Installing : perl-HTTP-Tiny-0.070-408 [ ] 26/40
Installing : perl-HTTP-Tiny-0.070-408 [== ] 26/40
Installing : perl-HTTP-Tiny-0.070-408 [============ ] 26/40
Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 26/40
Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 26/40
Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 26/40
Installing : perl-Pod-Simple-1:3.35-4 [ ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [= ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [=== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [==== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [====== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [======= ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [========= ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [========== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [============ ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [============= ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [================ ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [================= ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [================== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 27/40
Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 27/40
Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 27/40
Installing : perl-Encode-4:2.94-16.fc [ ] 28/40
Installing : perl-Encode-4:2.94-16.fc [= ] 28/40
Installing : perl-Encode-4:2.94-16.fc [== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [=== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [==== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [===== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [====== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [======= ] 28/40
Installing : perl-Encode-4:2.94-16.fc [======== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [========= ] 28/40
Installing : perl-Encode-4:2.94-16.fc [========== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [=========== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [============ ] 28/40
Installing : perl-Encode-4:2.94-16.fc [============= ] 28/40
Installing : perl-Encode-4:2.94-16.fc [============== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [=============== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [================ ] 28/40
Installing : perl-Encode-4:2.94-16.fc [================= ] 28/40
Installing : perl-Encode-4:2.94-16.fc [================== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [=================== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [==================== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [===================== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [====================== ] 28/40
Installing : perl-Encode-4:2.94-16.fc [======================= ] 28/40
Installing : perl-Encode-4:2.94-16.fc [======================== ] 28/40
Installing : perl-Encode-4:2.94-16.fc27.riscv64 28/40
Installing : perl-Getopt-Long-1:2.50- [ ] 29/40
Installing : perl-Getopt-Long-1:2.50- [=== ] 29/40
Installing : perl-Getopt-Long-1:2.50- [==== ] 29/40
Installing : perl-Getopt-Long-1:2.50- [===== ] 29/40
Installing : perl-Getopt-Long-1:2.50- [====== ] 29/40
Installing : perl-Getopt-Long-1:2.50- [======= ] 29/40
Installing : perl-Getopt-Long-1:2.50- [========= ] 29/40
Installing : perl-Getopt-Long-1:2.50- [=============== ] 29/40
Installing : perl-Getopt-Long-1:2.50- [===================== ] 29/40
Installing : perl-Getopt-Long-1:2.50- [======================== ] 29/40
Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 29/40
Installing : perl-Pod-Usage-4:1.69-40 [ ] 30/40
Installing : perl-Pod-Usage-4:1.69-40 [== ] 30/40
Installing : perl-Pod-Usage-4:1.69-40 [=== ] 30/40
Installing : perl-Pod-Usage-4:1.69-40 [======== ] 30/40
Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 30/40
Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 30/40
Installing : perl-podlators-4.09-408. [ ] 31/40
Installing : perl-podlators-4.09-408. [= ] 31/40
Installing : perl-podlators-4.09-408. [== ] 31/40
Installing : perl-podlators-4.09-408. [=== ] 31/40
Installing : perl-podlators-4.09-408. [==== ] 31/40
Installing : perl-podlators-4.09-408. [===== ] 31/40
Installing : perl-podlators-4.09-408. [====== ] 31/40
Installing : perl-podlators-4.09-408. [======= ] 31/40
Installing : perl-podlators-4.09-408. [=========== ] 31/40
Installing : perl-podlators-4.09-408. [=============== ] 31/40
Installing : perl-podlators-4.09-408. [================ ] 31/40
Installing : perl-podlators-4.09-408. [================= ] 31/40
Installing : perl-podlators-4.09-408. [===================== ] 31/40
Installing : perl-podlators-4.09-408. [====================== ] 31/40
Installing : perl-podlators-4.09-408. [======================= ] 31/40
Installing : perl-podlators-4.09-408. [======================== ] 31/40
Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 31/40
Installing : perl-Pod-Perldoc-3.28-40 [ ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [= ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [=== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [==== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [===== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [====== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [================ ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [================= ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [================== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 32/40
Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 32/40
Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 32/40
Installing : perl-Thread-Queue-3.12-4 [ ] 33/40
Installing : perl-Thread-Queue-3.12-4 [===== ] 33/40
Installing : perl-Thread-Queue-3.12-4 [====== ] 33/40
Installing : perl-Thread-Queue-3.12-4 [======================== ] 33/40
Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 33/40
Installing : perl-Data-Dumper-2.167-4 [ ] 34/40
Installing : perl-Data-Dumper-2.167-4 [=== ] 34/40
Installing : perl-Data-Dumper-2.167-4 [==== ] 34/40
Installing : perl-Data-Dumper-2.167-4 [======== ] 34/40
Installing : perl-Data-Dumper-2.167-4 [============ ] 34/40
Installing : perl-Data-Dumper-2.167-4 [=============== ] 34/40
Installing : perl-Data-Dumper-2.167-4 [=================== ] 34/40
Installing : perl-Data-Dumper-2.167-4 [====================== ] 34/40
Installing : perl-Data-Dumper-2.167-4 [======================= ] 34/40
Installing : perl-Data-Dumper-2.167-4 [======================== ] 34/40
Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 34/40
Installing : m4-1.4.18-5.fc28.riscv64 [ ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [= ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 35/40
Installing : m4-1.4.18-5.fc28.riscv64 35/40
Running scriptlet: m4-1.4.18-5.fc28.riscv64 35/40
Installing : tar-2:1.29-7.fc27.riscv6 [ ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [= ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 36/40
Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 36/40
Installing : tar-2:1.29-7.fc27.riscv64 36/40
Running scriptlet: tar-2:1.29-7.fc27.riscv64 36/40
Installing : emacs-filesystem-1:25.3- [ ] 37/40
Installing : emacs-filesystem-1:25.3- [===== ] 37/40
Installing : emacs-filesystem-1:25.3- [============ ] 37/40
Installing : emacs-filesystem-1:25.3- [=================== ] 37/40
Installing : emacs-filesystem-1:25.3-5.fc28.noarch 37/40
Installing : autoconf-2.69-26.fc28.no [ ] 38/40
Installing : autoconf-2.69-26.fc28.no [= ] 38/40
Installing : autoconf-2.69-26.fc28.no [== ] 38/40
Installing : autoconf-2.69-26.fc28.no [=== ] 38/40
Installing : autoconf-2.69-26.fc28.no [==== ] 38/40
Installing : autoconf-2.69-26.fc28.no [===== ] 38/40
Installing : autoconf-2.69-26.fc28.no [====== ] 38/40
Installing : autoconf-2.69-26.fc28.no [======= ] 38/40
Installing : autoconf-2.69-26.fc28.no [======== ] 38/40
Installing : autoconf-2.69-26.fc28.no [========= ] 38/40
Installing : autoconf-2.69-26.fc28.no [========== ] 38/40
Installing : autoconf-2.69-26.fc28.no [=========== ] 38/40
Installing : autoconf-2.69-26.fc28.no [============ ] 38/40
Installing : autoconf-2.69-26.fc28.no [============= ] 38/40
Installing : autoconf-2.69-26.fc28.no [============== ] 38/40
Installing : autoconf-2.69-26.fc28.no [=============== ] 38/40
Installing : autoconf-2.69-26.fc28.no [================ ] 38/40
Installing : autoconf-2.69-26.fc28.no [================= ] 38/40
Installing : autoconf-2.69-26.fc28.no [================== ] 38/40
Installing : autoconf-2.69-26.fc28.no [=================== ] 38/40
Installing : autoconf-2.69-26.fc28.no [==================== ] 38/40
Installing : autoconf-2.69-26.fc28.no [===================== ] 38/40
Installing : autoconf-2.69-26.fc28.no [====================== ] 38/40
Installing : autoconf-2.69-26.fc28.no [======================= ] 38/40
Installing : autoconf-2.69-26.fc28.no [======================== ] 38/40
Installing : autoconf-2.69-26.fc28.noarch 38/40
Running scriptlet: autoconf-2.69-26.fc28.noarch 38/40
Installing : automake-1.15.1-3.fc28.n [ ] 39/40
Installing : automake-1.15.1-3.fc28.n [= ] 39/40
Installing : automake-1.15.1-3.fc28.n [== ] 39/40
Installing : automake-1.15.1-3.fc28.n [=== ] 39/40
Installing : automake-1.15.1-3.fc28.n [==== ] 39/40
Installing : automake-1.15.1-3.fc28.n [===== ] 39/40
Installing : automake-1.15.1-3.fc28.n [====== ] 39/40
Installing : automake-1.15.1-3.fc28.n [======= ] 39/40
Installing : automake-1.15.1-3.fc28.n [======== ] 39/40
Installing : automake-1.15.1-3.fc28.n [========= ] 39/40
Installing : automake-1.15.1-3.fc28.n [========== ] 39/40
Installing : automake-1.15.1-3.fc28.n [=========== ] 39/40
Installing : automake-1.15.1-3.fc28.n [============ ] 39/40
Installing : automake-1.15.1-3.fc28.n [============= ] 39/40
Installing : automake-1.15.1-3.fc28.n [============== ] 39/40
Installing : automake-1.15.1-3.fc28.n [=============== ] 39/40
Installing : automake-1.15.1-3.fc28.n [================ ] 39/40
Installing : automake-1.15.1-3.fc28.n [================= ] 39/40
Installing : automake-1.15.1-3.fc28.n [================== ] 39/40
Installing : automake-1.15.1-3.fc28.n [=================== ] 39/40
Installing : automake-1.15.1-3.fc28.n [==================== ] 39/40
Installing : automake-1.15.1-3.fc28.n [===================== ] 39/40
Installing : automake-1.15.1-3.fc28.n [====================== ] 39/40
Installing : automake-1.15.1-3.fc28.n [======================= ] 39/40
Installing : automake-1.15.1-3.fc28.n [======================== ] 39/40
Installing : automake-1.15.1-3.fc28.noarch 39/40
Running scriptlet: automake-1.15.1-3.fc28.noarch 39/40
Installing : libtool-2.4.6-21.fc27.ri [ ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [= ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [=== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [==== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [===== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [====== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [======= ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [======== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [========= ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [========== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [=========== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [============ ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [============= ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [============== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [=============== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [================ ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [================= ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [================== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [=================== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [==================== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [===================== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [====================== ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [======================= ] 40/40
Installing : libtool-2.4.6-21.fc27.ri [======================== ] 40/40
Installing : libtool-2.4.6-21.fc27.riscv64 40/40
Running scriptlet: libtool-2.4.6-21.fc27.riscv64 40/40
Verifying : autoconf-2.69-26.fc28.noarch 1/40
Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 2/40
Verifying : automake-1.15.1-3.fc28.noarch 3/40
Verifying : libtool-2.4.6-21.fc27.riscv64 4/40
Verifying : tar-2:1.29-7.fc27.riscv64 5/40
Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 6/40
Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 7/40
Verifying : perl-File-Path-2.15-1.fc27.noarch 8/40
Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 9/40
Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 10/40
Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 11/40
Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 12/40
Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 13/40
Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 14/40
Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 15/40
Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 16/40
Verifying : perl-threads-1:2.21-1.fc27.riscv64 17/40
Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 18/40
Verifying : m4-1.4.18-5.fc28.riscv64 19/40
Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 20/40
Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 21/40
Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 22/40
Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 23/40
Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 24/40
Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 25/40
Verifying : perl-threads-shared-1.58-1.fc27.riscv64 26/40
Verifying : perl-Socket-4:2.027-1.fc27.riscv64 27/40
Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 28/40
Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 29/40
Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 30/40
Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 31/40
Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 32/40
Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 33/40
Verifying : perl-Encode-4:2.94-16.fc27.riscv64 34/40
Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 35/40
Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 36/40
Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 37/40
Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 38/40
Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 39/40
Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 40/40
Installed:
autoconf.noarch 2.69-26.fc28
automake.noarch 1.15.1-3.fc28
libtool.riscv64 2.4.6-21.fc27
emacs-filesystem.noarch 1:25.3-5.fc28
m4.riscv64 1.4.18-5.fc28
perl-Carp.noarch 1.42-408.fc27.0.riscv64
perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64
perl-Encode.riscv64 4:2.94-16.fc27
perl-Errno.riscv64 1.28-408.fc28.1.riscv64
perl-Exporter.noarch 5.72-408.fc27.0.riscv64
perl-File-Path.noarch 2.15-1.fc27
perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64
perl-Getopt-Long.noarch 1:2.50-3.fc27
perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64
perl-IO.riscv64 1.38-408.fc28.1.riscv64
perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64
perl-PathTools.riscv64 3.67-408.fc27.0.riscv64
perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64
perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64
perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64
perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64
perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27
perl-Socket.riscv64 4:2.027-1.fc27
perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64
perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64
perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64
perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64
perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64
perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64
perl-Time-Local.noarch 1:1.250-394.fc27
perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64
perl-constant.noarch 1.33-408.fc27.0.riscv64
perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-parent.noarch 1:0.236-408.fc27.0.riscv64
perl-podlators.noarch 4.09-408.fc27.0.riscv64
perl-threads.riscv64 1:2.21-1.fc27
perl-threads-shared.riscv64 1.58-1.fc27
tar.riscv64 2:1.29-7.fc27
Complete!
+ dnf -y update --best
Last metadata expiration check: 0:03:56 ago on Wed Feb 21 17:38:34 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y group install buildsys-build
Last metadata expiration check: 0:04:16 ago on Wed Feb 21 17:38:34 2018.
No match for group package "gcc-c++"
No match for group package "gcc"
Dependencies resolved.
================================================================================
Group Packages
================================================================================
Marking packages as installed by the group:
@Buildsystem building group fedora-release rpm-build bzip2
unzip patch xz
shadow-utils bash cpio
which tar sed
gzip findutils coreutils
diffutils info redhat-rpm-config
util-linux make grep
gawk
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing group packages:
bzip2 riscv64 1.0.6-24.fc28 local 81 k
diffutils riscv64 3.6-3.fc28 local 577 k
make riscv64 1:4.2.1-6.fc27 local 486 k
patch riscv64 2.7.5-6.fc27 local 270 k
redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k
rpm-build riscv64 4.14.1-6.fc28.1 local 235 k
unzip riscv64 6.0-36.fc28 local 398 k
which riscv64 2.21-4.fc28 local 65 k
xz riscv64 5.2.3-5.fc28 local 212 k
Installing dependencies:
binutils riscv64 2.30-1.fc28 local 6.9 M
dwz riscv64 0.12-5.fc28 local 108 k
elfutils riscv64 0.170-4.fc28 local 791 k
file riscv64 5.32-3.fc28 local 81 k
fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k
ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k
gnat-srpm-macros noarch 4-5.fc28 local 8.8 k
go-srpm-macros noarch 2-11.fc28 local 8.4 k
libpkgconf riscv64 1.4.1-1.fc27 local 74 k
nim-srpm-macros noarch 1-1.fc28 local 7.6 k
ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k
openblas-srpm-macros noarch 2-2.fc27 local 6.6 k
perl-srpm-macros noarch 1-26.fc28 local 9.7 k
pkgconf riscv64 1.4.1-1.fc27 local 35 k
pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k
pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k
python-srpm-macros noarch 3-26.fc28 local 10 k
qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k
rust-srpm-macros noarch 5-1.fc28 local 8.0 k
zip riscv64 3.0-20.fc28 local 271 k
zstd riscv64 1.3.3-1.fc27 local 1.1 M
Transaction Summary
================================================================================
Install 30 Packages
Total download size: 12 M
Installed size: 48 M
Downloading Packages:
(1/30): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA
(1/30): redhat-rpm-config-96-1.fc28.0.riscv64.n 735 kB/s | 75 kB 00:00
(2-3/30): make-4.2.1 1% [ ] 1.4 MB/s | 235 kB 00:08 ETA
(2/30): nim-srpm-macros-1-1.fc28.noarch.rpm 298 kB/s | 7.6 kB 00:00
(3-4/30): make-4.2.1 2% [ ] 1.4 MB/s | 274 kB 00:08 ETA
(3/30): ocaml-srpm-macros-5-2.fc27.noarch.rpm 305 kB/s | 7.8 kB 00:00
(4-5/30): make-4.2.1 2% [- ] 1.4 MB/s | 314 kB 00:08 ETA
(4/30): openblas-srpm-macros-2-2.fc27.noarch.rp 256 kB/s | 6.6 kB 00:00
(5-6/30): diffutils- 2% [- ] 1.4 MB/s | 353 kB 00:08 ETA
(5/30): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 353 kB/s | 9.0 kB 00:00
(6-7/30): diffutils- 3% [- ] 1.4 MB/s | 394 kB 00:08 ETA
(6/30): rust-srpm-macros-5-1.fc28.noarch.rpm 234 kB/s | 8.0 kB 00:00
(7-8/30): diffutils- 3% [- ] 1.3 MB/s | 434 kB 00:08 ETA
(7/30): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 919 kB/s | 235 kB 00:00
(8-9/30): diffutils- 9% [=- ] 1.4 MB/s | 1.1 MB 00:07 ETA
(8/30): make-4.2.1-6.fc27.riscv64.rpm 565 kB/s | 486 kB 00:00
(9-10/30): diffutils 11% [== ] 1.4 MB/s | 1.4 MB 00:07 ETA
(9/30): which-2.21-4.fc28.riscv64.rpm 650 kB/s | 65 kB 00:00
(10-11/30): diffutil 13% [==- ] 1.4 MB/s | 1.6 MB 00:07 ETA
(10/30): diffutils-3.6-3.fc28.riscv64.rpm 508 kB/s | 577 kB 00:01
(11-12/30): zstd-1.3 13% [==- ] 1.4 MB/s | 1.6 MB 00:07 ETA
(11/30): patch-2.7.5-6.fc27.riscv64.rpm 702 kB/s | 270 kB 00:00
(12-13/30): unzip-6. 20% [==== ] 1.5 MB/s | 2.4 MB 00:06 ETA
(12/30): unzip-6.0-36.fc28.riscv64.rpm 817 kB/s | 398 kB 00:00
(13-14/30): xz-5.2.3 23% [====- ] 1.5 MB/s | 2.8 MB 00:06 ETA
(13/30): xz-5.2.3-5.fc28.riscv64.rpm 666 kB/s | 212 kB 00:00
(14-15/30): bzip2-1. 25% [===== ] 1.5 MB/s | 3.0 MB 00:05 ETA
(14/30): bzip2-1.0.6-24.fc28.riscv64.rpm 474 kB/s | 81 kB 00:00
(15-16/30): elfutils 25% [===== ] 1.5 MB/s | 3.1 MB 00:05 ETA
(15/30): file-5.32-3.fc28.riscv64.rpm 716 kB/s | 81 kB 00:00
(16-17/30): elfutils 28% [=====- ] 1.5 MB/s | 3.3 MB 00:05 ETA
(16-18/30): zstd-1.3 35% [======= ] 1.6 MB/s | 4.2 MB 00:04 ETA
(16/30): zstd-1.3.3-1.fc27.riscv64.rpm 651 kB/s | 1.1 MB 00:01
(17-18/30): elfutils 37% [=======- ] 1.5 MB/s | 4.4 MB 00:04 ETA
(17/30): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 502 kB/s | 14 kB 00:00
(18-19/30): elfutils 37% [=======- ] 1.5 MB/s | 4.5 MB 00:04 ETA
(18/30): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 583 kB/s | 15 kB 00:00
(19-20/30): elfutils 38% [=======- ] 1.5 MB/s | 4.5 MB 00:04 ETA
(19/30): pkgconf-1.4.1-1.fc27.riscv64.rpm 605 kB/s | 35 kB 00:00
(20-21/30): elfutils 39% [=======- ] 1.5 MB/s | 4.7 MB 00:04 ETA
(20/30): libpkgconf-1.4.1-1.fc27.riscv64.rpm 793 kB/s | 74 kB 00:00
(21-22/30): elfutils 41% [======== ] 1.5 MB/s | 4.9 MB 00:04 ETA
(21/30): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 265 kB/s | 7.5 kB 00:00
(22-23/30): elfutils 41% [======== ] 1.5 MB/s | 4.9 MB 00:04 ETA
(22/30): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 327 kB/s | 8.2 kB 00:00
(23-24/30): elfutils 42% [======== ] 1.5 MB/s | 5.0 MB 00:04 ETA
(23/30): gnat-srpm-macros-4-5.fc28.noarch.rpm 340 kB/s | 8.8 kB 00:00
(24-25/30): elfutils 42% [======== ] 1.5 MB/s | 5.0 MB 00:04 ETA
(24/30): go-srpm-macros-2-11.fc28.noarch.rpm 322 kB/s | 8.4 kB 00:00
(25-26/30): elfutils 42% [========- ] 1.5 MB/s | 5.0 MB 00:04 ETA
(25/30): perl-srpm-macros-1-26.fc28.noarch.rpm 328 kB/s | 9.7 kB 00:00
(26-27/30): elfutils 43% [========- ] 1.5 MB/s | 5.1 MB 00:04 ETA
(26/30): python-srpm-macros-3-26.fc28.noarch.rp 389 kB/s | 10 kB 00:00
(27-28/30): elfutils 43% [========- ] 1.5 MB/s | 5.1 MB 00:04 ETA
(27/30): elfutils-0.170-4.fc28.riscv64.rpm 530 kB/s | 791 kB 00:01
(28-29/30): binutils 44% [========- ] 1.5 MB/s | 5.3 MB 00:04 ETA
(28/30): dwz-0.12-5.fc28.riscv64.rpm 419 kB/s | 108 kB 00:00
(29-30/30): zip-3.0- 46% [========= ] 1.5 MB/s | 5.4 MB 00:04 ETA
(29/30): zip-3.0-20.fc28.riscv64.rpm 1.0 MB/s | 271 kB 00:00
(30/30): binutils-2. 49% [=========- ] 1.5 MB/s | 5.9 MB 00:03 ETA
(30/30): binutils-2. 56% [=========== ] 1.6 MB/s | 6.7 MB 00:03 ETA
(30/30): binutils-2. 63% [============- ] 1.7 MB/s | 7.5 MB 00:02 ETA
(30/30): binutils-2. 71% [============== ] 1.7 MB/s | 8.4 MB 00:01 ETA
(30/30): binutils-2. 78% [===============- ] 1.8 MB/s | 9.2 MB 00:01 ETA
(30/30): binutils-2. 85% [================= ] 1.9 MB/s | 10 MB 00:00 ETA
(30/30): binutils-2. 92% [==================- ] 1.9 MB/s | 11 MB 00:00 ETA
(30/30): binutils-2.100% [====================] 2.0 MB/s | 12 MB 00:00 ETA
(30/30): binutils-2.30-1.fc28.riscv64.rpm 1.5 MB/s | 6.9 MB 00:04
--------------------------------------------------------------------------------
Total 1.7 MB/s | 12 MB 00:06
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [=== ] 1/1
Preparing : [===== ] 1/1
Preparing : [====== ] 1/1
Preparing : [======== ] 1/1
Preparing : [========== ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============= ] 1/1
Preparing : [=============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [===================== ] 1/1
Preparing : [======================= ] 1/1
Preparing : [========================= ] 1/1
Preparing : [=========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================== ] 1/1
Preparing : [================================ ] 1/1
Preparing : [================================= ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [====================================== ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================== ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================= ] 1/1
Preparing : [=============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : 1/1
Installing : file-5.32-3.fc28.riscv64 [ ] 1/30
Installing : file-5.32-3.fc28.riscv64 [====== ] 1/30
Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/30
Installing : file-5.32-3.fc28.riscv64 [================== ] 1/30
Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/30
Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/30
Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/30
Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/30
Installing : file-5.32-3.fc28.riscv64 1/30
Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/30
Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/30
Installing : unzip-6.0-36.fc28.riscv64 2/30
Installing : zip-3.0-20.fc28.riscv64 [ ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/30
Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/30
Installing : zip-3.0-20.fc28.riscv64 3/30
Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/30
Installing : dwz-0.12-5.fc28.riscv64 4/30
Installing : python-srpm-macros-3-26. [ ] 5/30
Installing : python-srpm-macros-3-26. [======================= ] 5/30
Installing : python-srpm-macros-3-26.fc28.noarch 5/30
Installing : perl-srpm-macros-1-26.fc [ ] 6/30
Installing : perl-srpm-macros-1-26.fc [====================== ] 6/30
Installing : perl-srpm-macros-1-26.fc28.noarch 6/30
Installing : go-srpm-macros-2-11.fc28 [ ] 7/30
Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/30
Installing : go-srpm-macros-2-11.fc28.noarch 7/30
Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/30
Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/30
Installing : gnat-srpm-macros-4-5.fc28.noarch 8/30
Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/30
Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/30
Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/30
Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/30
Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/30
Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/30
Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/30
Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/30
Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/30
Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/30
Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/30
Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/30
Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/30
Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/30
Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/30
Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/30
Installing : pkgconf-1.4.1-1.fc27.riscv64 12/30
Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/30
Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/30
Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/30
Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/30
Installing : pkgconf-pkg-config-1.4.1 [ ] 14/30
Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/30
Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/30
Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/30
Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/30
Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/30
Installing : binutils-2.30-1.fc28.ris [ ] 15/30
Installing : binutils-2.30-1.fc28.ris [= ] 15/30
Installing : binutils-2.30-1.fc28.ris [== ] 15/30
Installing : binutils-2.30-1.fc28.ris [=== ] 15/30
Installing : binutils-2.30-1.fc28.ris [==== ] 15/30
Installing : binutils-2.30-1.fc28.ris [===== ] 15/30
Installing : binutils-2.30-1.fc28.ris [====== ] 15/30
Installing : binutils-2.30-1.fc28.ris [======= ] 15/30
Installing : binutils-2.30-1.fc28.ris [======== ] 15/30
Installing : binutils-2.30-1.fc28.ris [========= ] 15/30
Installing : binutils-2.30-1.fc28.ris [========== ] 15/30
Installing : binutils-2.30-1.fc28.ris [=========== ] 15/30
Installing : binutils-2.30-1.fc28.ris [============ ] 15/30
Installing : binutils-2.30-1.fc28.ris [============= ] 15/30
Installing : binutils-2.30-1.fc28.ris [============== ] 15/30
Installing : binutils-2.30-1.fc28.ris [=============== ] 15/30
Installing : binutils-2.30-1.fc28.ris [================ ] 15/30
Installing : binutils-2.30-1.fc28.ris [================= ] 15/30
Installing : binutils-2.30-1.fc28.ris [================== ] 15/30
Installing : binutils-2.30-1.fc28.ris [=================== ] 15/30
Installing : binutils-2.30-1.fc28.ris [==================== ] 15/30
Installing : binutils-2.30-1.fc28.ris [===================== ] 15/30
Installing : binutils-2.30-1.fc28.ris [====================== ] 15/30
Installing : binutils-2.30-1.fc28.ris [======================= ] 15/30
Installing : binutils-2.30-1.fc28.ris [======================== ] 15/30
Installing : binutils-2.30-1.fc28.riscv64 15/30
Running scriptlet: binutils-2.30-1.fc28.riscv64 15/30
Installing : elfutils-0.170-4.fc28.ri [ ] 16/30
Installing : elfutils-0.170-4.fc28.ri [= ] 16/30
Installing : elfutils-0.170-4.fc28.ri [== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [=== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [==== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [===== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [====== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [======= ] 16/30
Installing : elfutils-0.170-4.fc28.ri [======== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [========= ] 16/30
Installing : elfutils-0.170-4.fc28.ri [========== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [=========== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [============ ] 16/30
Installing : elfutils-0.170-4.fc28.ri [============= ] 16/30
Installing : elfutils-0.170-4.fc28.ri [============== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [=============== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [================ ] 16/30
Installing : elfutils-0.170-4.fc28.ri [================= ] 16/30
Installing : elfutils-0.170-4.fc28.ri [================== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [=================== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [==================== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [===================== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [====================== ] 16/30
Installing : elfutils-0.170-4.fc28.ri [======================= ] 16/30
Installing : elfutils-0.170-4.fc28.ri [======================== ] 16/30
Installing : elfutils-0.170-4.fc28.riscv64 16/30
Installing : bzip2-1.0.6-24.fc28.risc [ ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [===== ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [========== ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [============== ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 17/30
Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 17/30
Installing : bzip2-1.0.6-24.fc28.riscv64 17/30
Installing : xz-5.2.3-5.fc28.riscv64 [ ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [= ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 18/30
Installing : xz-5.2.3-5.fc28.riscv64 18/30
Installing : patch-2.7.5-6.fc27.riscv [ ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [= ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [=== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [==== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [===== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [====== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [======= ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [======== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [========= ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [========== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [=========== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [============ ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [============= ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [============== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [=============== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [================ ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [================= ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [================== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [=================== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [==================== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [===================== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [====================== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [======================= ] 19/30
Installing : patch-2.7.5-6.fc27.riscv [======================== ] 19/30
Installing : patch-2.7.5-6.fc27.riscv64 19/30
Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 20/30
Installing : zstd-1.3.3-1.fc27.riscv64 20/30
Installing : rust-srpm-macros-5-1.fc2 [ ] 21/30
Installing : rust-srpm-macros-5-1.fc2 [=== ] 21/30
Installing : rust-srpm-macros-5-1.fc2 [===== ] 21/30
Installing : rust-srpm-macros-5-1.fc2 [======================= ] 21/30
Installing : rust-srpm-macros-5-1.fc28.noarch 21/30
Installing : qt5-srpm-macros-5.10.0-1 [ ] 22/30
Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 22/30
Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 22/30
Installing : openblas-srpm-macros-2-2 [ ] 23/30
Installing : openblas-srpm-macros-2-2 [================ ] 23/30
Installing : openblas-srpm-macros-2-2.fc27.noarch 23/30
Installing : ocaml-srpm-macros-5-2.fc [ ] 24/30
Installing : ocaml-srpm-macros-5-2.fc [===================== ] 24/30
Installing : ocaml-srpm-macros-5-2.fc27.noarch 24/30
Installing : nim-srpm-macros-1-1.fc28 [ ] 25/30
Installing : nim-srpm-macros-1-1.fc28 [=== ] 25/30
Installing : nim-srpm-macros-1-1.fc28 [===== ] 25/30
Installing : nim-srpm-macros-1-1.fc28 [======================= ] 25/30
Installing : nim-srpm-macros-1-1.fc28.noarch 25/30
Installing : redhat-rpm-config-96-1.f [ ] 26/30
Installing : redhat-rpm-config-96-1.f [== ] 26/30
Installing : redhat-rpm-config-96-1.f [=== ] 26/30
Installing : redhat-rpm-config-96-1.f [========= ] 26/30
Installing : redhat-rpm-config-96-1.f [=========== ] 26/30
Installing : redhat-rpm-config-96-1.f [================= ] 26/30
Installing : redhat-rpm-config-96-1.f [================== ] 26/30
Installing : redhat-rpm-config-96-1.f [=================== ] 26/30
Installing : redhat-rpm-config-96-1.f [===================== ] 26/30
Installing : redhat-rpm-config-96-1.f [====================== ] 26/30
Installing : redhat-rpm-config-96-1.f [======================== ] 26/30
Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 26/30
Installing : diffutils-3.6-3.fc28.ris [ ] 27/30
Installing : diffutils-3.6-3.fc28.ris [= ] 27/30
Installing : diffutils-3.6-3.fc28.ris [== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [=== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [==== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [===== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [====== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [======= ] 27/30
Installing : diffutils-3.6-3.fc28.ris [======== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [========= ] 27/30
Installing : diffutils-3.6-3.fc28.ris [========== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [=========== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [============ ] 27/30
Installing : diffutils-3.6-3.fc28.ris [============= ] 27/30
Installing : diffutils-3.6-3.fc28.ris [============== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [=============== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [================ ] 27/30
Installing : diffutils-3.6-3.fc28.ris [================= ] 27/30
Installing : diffutils-3.6-3.fc28.ris [================== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [=================== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [==================== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [===================== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [====================== ] 27/30
Installing : diffutils-3.6-3.fc28.ris [======================= ] 27/30
Installing : diffutils-3.6-3.fc28.ris [======================== ] 27/30
Installing : diffutils-3.6-3.fc28.riscv64 27/30
Running scriptlet: diffutils-3.6-3.fc28.riscv64 27/30
Installing : rpm-build-4.14.1-6.fc28. [ ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [= ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [=== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [==== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [===== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [====== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [======= ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [======== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [========= ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [=========== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [============ ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [============== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [=============== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [================ ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [================= ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [================== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [=================== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [==================== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [===================== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [====================== ] 28/30
Installing : rpm-build-4.14.1-6.fc28. [======================== ] 28/30
Installing : rpm-build-4.14.1-6.fc28.1.riscv64 28/30
Installing : which-2.21-4.fc28.riscv6 [ ] 29/30
Installing : which-2.21-4.fc28.riscv6 [===== ] 29/30
Installing : which-2.21-4.fc28.riscv6 [=========== ] 29/30
Installing : which-2.21-4.fc28.riscv6 [=============== ] 29/30
Installing : which-2.21-4.fc28.riscv6 [================ ] 29/30
Installing : which-2.21-4.fc28.riscv6 [================= ] 29/30
Installing : which-2.21-4.fc28.riscv6 [================== ] 29/30
Installing : which-2.21-4.fc28.riscv6 [======================== ] 29/30
Installing : which-2.21-4.fc28.riscv64 29/30
Running scriptlet: which-2.21-4.fc28.riscv64 29/30
Installing : make-1:4.2.1-6.fc27.risc [ ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [= ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [=== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [==== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [===== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [====== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [======= ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [======== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [========= ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [========== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [=========== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [============ ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [============= ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [============== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [=============== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [================ ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [================= ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [================== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [=================== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [==================== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [===================== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [====================== ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [======================= ] 30/30
Installing : make-1:4.2.1-6.fc27.risc [======================== ] 30/30
Installing : make-1:4.2.1-6.fc27.riscv64 30/30
Running scriptlet: make-1:4.2.1-6.fc27.riscv64 30/30
Verifying : diffutils-3.6-3.fc28.riscv64 1/30
Verifying : make-1:4.2.1-6.fc27.riscv64 2/30
Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/30
Verifying : nim-srpm-macros-1-1.fc28.noarch 4/30
Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/30
Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/30
Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/30
Verifying : rust-srpm-macros-5-1.fc28.noarch 8/30
Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/30
Verifying : zstd-1.3.3-1.fc27.riscv64 10/30
Verifying : which-2.21-4.fc28.riscv64 11/30
Verifying : patch-2.7.5-6.fc27.riscv64 12/30
Verifying : unzip-6.0-36.fc28.riscv64 13/30
Verifying : xz-5.2.3-5.fc28.riscv64 14/30
Verifying : bzip2-1.0.6-24.fc28.riscv64 15/30
Verifying : elfutils-0.170-4.fc28.riscv64 16/30
Verifying : file-5.32-3.fc28.riscv64 17/30
Verifying : binutils-2.30-1.fc28.riscv64 18/30
Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 19/30
Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 20/30
Verifying : pkgconf-1.4.1-1.fc27.riscv64 21/30
Verifying : libpkgconf-1.4.1-1.fc27.riscv64 22/30
Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 23/30
Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 24/30
Verifying : gnat-srpm-macros-4-5.fc28.noarch 25/30
Verifying : go-srpm-macros-2-11.fc28.noarch 26/30
Verifying : perl-srpm-macros-1-26.fc28.noarch 27/30
Verifying : python-srpm-macros-3-26.fc28.noarch 28/30
Verifying : dwz-0.12-5.fc28.riscv64 29/30
Verifying : zip-3.0-20.fc28.riscv64 30/30
Installed:
bzip2.riscv64 1.0.6-24.fc28
diffutils.riscv64 3.6-3.fc28
make.riscv64 1:4.2.1-6.fc27
patch.riscv64 2.7.5-6.fc27
redhat-rpm-config.noarch 96-1.fc28.0.riscv64
rpm-build.riscv64 4.14.1-6.fc28.1
unzip.riscv64 6.0-36.fc28
which.riscv64 2.21-4.fc28
xz.riscv64 5.2.3-5.fc28
binutils.riscv64 2.30-1.fc28
dwz.riscv64 0.12-5.fc28
elfutils.riscv64 0.170-4.fc28
file.riscv64 5.32-3.fc28
fpc-srpm-macros.noarch 1.1-4.fc28
ghc-srpm-macros.noarch 1.4.2-7.fc28
gnat-srpm-macros.noarch 4-5.fc28
go-srpm-macros.noarch 2-11.fc28
libpkgconf.riscv64 1.4.1-1.fc27
nim-srpm-macros.noarch 1-1.fc28
ocaml-srpm-macros.noarch 5-2.fc27
openblas-srpm-macros.noarch 2-2.fc27
perl-srpm-macros.noarch 1-26.fc28
pkgconf.riscv64 1.4.1-1.fc27
pkgconf-m4.noarch 1.4.1-1.fc27
pkgconf-pkg-config.riscv64 1.4.1-1.fc27
python-srpm-macros.noarch 3-26.fc28
qt5-srpm-macros.noarch 5.10.0-1.fc28
rust-srpm-macros.noarch 5-1.fc28
zip.riscv64 3.0-20.fc28
zstd.riscv64 1.3.3-1.fc27
Complete!
+ dnf -y install hack-gcc glibc-devel
Last metadata expiration check: 0:06:09 ago on Wed Feb 21 17:38:34 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
glibc-devel riscv64 2.27-4.fc28 local 1.0 M
Installing dependencies:
glibc-headers riscv64 2.27-4.fc28 local 442 k
kernel-headers noarch 4.15.0-1.fc27 local 1.1 M
libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k
Transaction Summary
================================================================================
Install 4 Packages
Total download size: 2.5 M
Installed size: 7.1 M
Downloading Packages:
(1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA
(1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 541 kB/s | 15 kB 00:00
(2-3/4): glibc-devel 1% [ ] 632 kB/s | 46 kB 00:03 ETA
(2-4/4): kernel-head 36% [======= ] 770 kB/s | 926 kB 00:02 ETA
(2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 827 kB/s | 442 kB 00:00
(3-4/4): glibc-devel 52% [========== ] 823 kB/s | 1.3 MB 00:01 ETA
(3-4/4): kernel-head 89% [=================- ] 963 kB/s | 2.2 MB 00:00 ETA
(3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 965 kB/s | 1.0 MB 00:01
(4/4): kernel-header 95% [=================== ] 963 kB/s | 2.4 MB 00:00 ETA
(4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 986 kB/s | 1.1 MB 00:01
--------------------------------------------------------------------------------
Total 1.9 MB/s | 2.5 MB 00:01
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [============ ] 1/1
Preparing : [========================= ] 1/1
Preparing : [====================================== ] 1/1
Preparing : 1/1
Installing : kernel-headers-4.15.0-1.f [ ] 1/4
Installing : kernel-headers-4.15.0-1.f [= ] 1/4
Installing : kernel-headers-4.15.0-1.f [== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========= ] 1/4
Installing : kernel-headers-4.15.0-1.f [========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [============ ] 1/4
Installing : kernel-headers-4.15.0-1.f [============= ] 1/4
Installing : kernel-headers-4.15.0-1.f [============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [================ ] 1/4
Installing : kernel-headers-4.15.0-1.f [================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4
Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4
Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : glibc-headers-2.27-4.fc28 [ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4
Installing : glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.riscv64 4/4
Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4
Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4
Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4
Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4
Installed:
glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28
kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28
Complete!
+ touch /rootok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off