OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Thu Feb 22 04:18:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
+ set -e
+ dnf clean all
0 files removed
+ useradd -d /builddir mockbuild
+ su -c 'mkdir /builddir/build' mockbuild
+ echo '%_topdir /builddir/build'
+ su -c 'rpm -i /var/tmp/mawk-1.3.4-9.20161107.fc25.src.rpm' mockbuild
+ dnf -y builddep /builddir/build/SPECS/mawk.spec
Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA
Local RPMS 7% [=- ] 2.9 MB/s | 895 kB 00:03 ETA
Local RPMS 14% [==- ] 2.9 MB/s | 1.7 MB 00:03 ETA
Local RPMS 22% [====- ] 2.9 MB/s | 2.6 MB 00:03 ETA
Local RPMS 30% [====== ] 2.9 MB/s | 3.6 MB 00:02 ETA
Local RPMS 38% [=======- ] 2.9 MB/s | 4.5 MB 00:02 ETA
Local RPMS 46% [========= ] 2.9 MB/s | 5.4 MB 00:02 ETA
Local RPMS 55% [=========== ] 3.0 MB/s | 6.4 MB 00:01 ETA
Local RPMS 59% [===========- ] 2.7 MB/s | 6.9 MB 00:01 ETA
Local RPMS 67% [============= ] 2.8 MB/s | 7.8 MB 00:01 ETA
Local RPMS 73% [==============- ] 2.7 MB/s | 8.5 MB 00:01 ETA
Local RPMS 78% [===============- ] 2.7 MB/s | 9.2 MB 00:00 ETA
Local RPMS 84% [================- ] 2.7 MB/s | 9.8 MB 00:00 ETA
Local RPMS 89% [=================- ] 2.6 MB/s | 10 MB 00:00 ETA
Local RPMS 95% [=================== ] 2.6 MB/s | 11 MB 00:00 ETA
Local RPMS 2.1 MB/s | 12 MB 00:05
Last metadata expiration check: 0:01:28 ago on Thu Feb 22 04:18:36 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y update --best
Last metadata expiration check: 0:01:58 ago on Thu Feb 22 04:18:36 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y group install buildsys-build
Last metadata expiration check: 0:02:18 ago on Thu Feb 22 04:18:36 2018.
No match for group package "gcc-c++"
No match for group package "gcc"
Dependencies resolved.
================================================================================
Group Packages
================================================================================
Marking packages as installed by the group:
@Buildsystem building group findutils coreutils patch
bzip2 which fedora-release
cpio gzip diffutils
util-linux shadow-utils gawk
sed tar bash
unzip info redhat-rpm-config
make rpm-build xz
grep
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing group packages:
bzip2 riscv64 1.0.6-24.fc28 local 81 k
diffutils riscv64 3.6-3.fc28 local 577 k
make riscv64 1:4.2.1-6.fc27 local 486 k
patch riscv64 2.7.5-6.fc27 local 270 k
redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k
rpm-build riscv64 4.14.1-6.fc28.1 local 235 k
tar riscv64 2:1.29-7.fc27 local 805 k
unzip riscv64 6.0-36.fc28 local 398 k
which riscv64 2.21-4.fc28 local 65 k
xz riscv64 5.2.3-5.fc28 local 212 k
Installing dependencies:
binutils riscv64 2.30-1.fc28 local 6.9 M
dwz riscv64 0.12-5.fc28 local 108 k
elfutils riscv64 0.170-4.fc28 local 791 k
file riscv64 5.32-3.fc28 local 81 k
fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k
ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k
gnat-srpm-macros noarch 4-5.fc28 local 8.8 k
go-srpm-macros noarch 2-11.fc28 local 8.4 k
libpkgconf riscv64 1.4.1-1.fc27 local 74 k
nim-srpm-macros noarch 1-1.fc28 local 7.6 k
ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k
openblas-srpm-macros noarch 2-2.fc27 local 6.6 k
perl-srpm-macros noarch 1-26.fc28 local 9.7 k
pkgconf riscv64 1.4.1-1.fc27 local 35 k
pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k
pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k
python-srpm-macros noarch 3-26.fc28 local 10 k
qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k
rust-srpm-macros noarch 5-1.fc28 local 8.0 k
zip riscv64 3.0-20.fc28 local 271 k
zstd riscv64 1.3.3-1.fc27 local 1.1 M
Transaction Summary
================================================================================
Install 31 Packages
Total download size: 13 M
Installed size: 50 M
Downloading Packages:
(1/31): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA
(1-3/31): tar-1.29-7 6% [= ] 2.6 MB/s | 799 kB 00:04 ETA
(1/31): make-4.2.1-6.fc27.riscv64.rpm 932 kB/s | 486 kB 00:00
(2-3/31): tar-1.29-7 11% [== ] 2.6 MB/s | 1.4 MB 00:04 ETA
(2/31): redhat-rpm-config-96-1.fc28.0.riscv64.n 834 kB/s | 75 kB 00:00
(3-4/31): tar-1.29-7 13% [==- ] 2.6 MB/s | 1.7 MB 00:04 ETA
(3/31): diffutils-3.6-3.fc28.riscv64.rpm 722 kB/s | 577 kB 00:00
(4-5/31): tar-1.29-7 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA
(4/31): nim-srpm-macros-1-1.fc28.noarch.rpm 48 kB/s | 7.6 kB 00:00
(5/31): tar-1.29-7.f 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA
(5/31): ocaml-srpm-macros-5-2.fc27.noarch.rpm 164 kB/s | 7.8 kB 00:00
(6-7/31): tar-1.29-7 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA
(6/31): openblas-srpm-macros-2-2.fc27.noarch.rp 153 kB/s | 6.6 kB 00:00
(7/31): tar-1.29-7.f 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA
(7/31): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 211 kB/s | 9.0 kB 00:00
(8-9/31): tar-1.29-7 13% [==- ] 2.5 MB/s | 1.8 MB 00:04 ETA
(8/31): rust-srpm-macros-5-1.fc28.noarch.rpm 196 kB/s | 8.0 kB 00:00
(9/31): tar-1.29-7.f 13% [==- ] 2.5 MB/s | 1.8 MB 00:04 ETA
(9/31): tar-1.29-7.fc27.riscv64.rpm 590 kB/s | 805 kB 00:01
(10-11/31): zstd-1.3 18% [===- ] 2.4 MB/s | 2.3 MB 00:04 ETA
(10/31): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 582 kB/s | 235 kB 00:00
(11-12/31): which-2. 19% [===- ] 2.4 MB/s | 2.4 MB 00:04 ETA
(11/31): which-2.21-4.fc28.riscv64.rpm 374 kB/s | 65 kB 00:00
(12-13/31): patch-2. 19% [===- ] 2.4 MB/s | 2.5 MB 00:04 ETA
(12/31): patch-2.7.5-6.fc27.riscv64.rpm 735 kB/s | 270 kB 00:00
(13-14/31): unzip-6. 25% [===== ] 2.4 MB/s | 3.3 MB 00:03 ETA
(13/31): unzip-6.0-36.fc28.riscv64.rpm 822 kB/s | 398 kB 00:00
(14-15/31): xz-5.2.3 29% [=====- ] 2.3 MB/s | 3.7 MB 00:03 ETA
(14/31): xz-5.2.3-5.fc28.riscv64.rpm 673 kB/s | 212 kB 00:00
(15-16/31): bzip2-1. 30% [====== ] 2.3 MB/s | 3.9 MB 00:03 ETA
(15/31): bzip2-1.0.6-24.fc28.riscv64.rpm 421 kB/s | 81 kB 00:00
(16-17/31): zstd-1.3 31% [====== ] 2.3 MB/s | 3.9 MB 00:03 ETA
(16/31): file-5.32-3.fc28.riscv64.rpm 493 kB/s | 81 kB 00:00
(17-18/31): zstd-1.3 33% [======- ] 2.3 MB/s | 4.2 MB 00:03 ETA
(17-19/31): binutils 39% [=======- ] 2.3 MB/s | 5.0 MB 00:03 ETA
(17/31): zstd-1.3.3-1.fc27.riscv64.rpm 606 kB/s | 1.1 MB 00:01
(18-19/31): elfutils 40% [======== ] 2.2 MB/s | 5.1 MB 00:03 ETA
(18/31): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 495 kB/s | 14 kB 00:00
(19-20/31): elfutils 40% [======== ] 2.2 MB/s | 5.1 MB 00:03 ETA
(19/31): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 564 kB/s | 15 kB 00:00
(20-21/31): elfutils 40% [======== ] 2.2 MB/s | 5.2 MB 00:03 ETA
(20/31): pkgconf-1.4.1-1.fc27.riscv64.rpm 607 kB/s | 35 kB 00:00
(21-22/31): elfutils 42% [======== ] 2.2 MB/s | 5.3 MB 00:03 ETA
(21/31): libpkgconf-1.4.1-1.fc27.riscv64.rpm 802 kB/s | 74 kB 00:00
(22-23/31): binutils 43% [========- ] 2.2 MB/s | 5.5 MB 00:03 ETA
(22/31): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 308 kB/s | 7.5 kB 00:00
(23-24/31): binutils 44% [========- ] 2.2 MB/s | 5.6 MB 00:03 ETA
(23/31): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 325 kB/s | 8.2 kB 00:00
(24-25/31): binutils 44% [========- ] 2.1 MB/s | 5.6 MB 00:03 ETA
(24/31): gnat-srpm-macros-4-5.fc28.noarch.rpm 359 kB/s | 8.8 kB 00:00
(25-26/31): binutils 44% [========- ] 2.1 MB/s | 5.6 MB 00:03 ETA
(25/31): go-srpm-macros-2-11.fc28.noarch.rpm 332 kB/s | 8.4 kB 00:00
(26-27/31): binutils 45% [========= ] 2.1 MB/s | 5.7 MB 00:03 ETA
(26/31): perl-srpm-macros-1-26.fc28.noarch.rpm 386 kB/s | 9.7 kB 00:00
(27-28/31): binutils 45% [========= ] 2.1 MB/s | 5.7 MB 00:03 ETA
(27/31): python-srpm-macros-3-26.fc28.noarch.rp 403 kB/s | 10 kB 00:00
(28-29/31): binutils 45% [========= ] 2.1 MB/s | 5.8 MB 00:03 ETA
(28/31): dwz-0.12-5.fc28.riscv64.rpm 868 kB/s | 108 kB 00:00
(29-30/31): binutils 48% [=========- ] 2.1 MB/s | 6.1 MB 00:03 ETA
(29/31): elfutils-0.170-4.fc28.riscv64.rpm 475 kB/s | 791 kB 00:01
(30-31/31): zip-3.0- 48% [=========- ] 2.0 MB/s | 6.1 MB 00:03 ETA
(30/31): zip-3.0-20.fc28.riscv64.rpm 709 kB/s | 271 kB 00:00
(31/31): binutils-2. 52% [==========- ] 2.0 MB/s | 6.6 MB 00:02 ETA
(31/31): binutils-2. 59% [===========- ] 2.1 MB/s | 7.5 MB 00:02 ETA
(31/31): binutils-2. 66% [============= ] 2.1 MB/s | 8.4 MB 00:01 ETA
(31/31): binutils-2. 71% [============== ] 2.1 MB/s | 9.1 MB 00:01 ETA
(31/31): binutils-2. 78% [===============- ] 2.2 MB/s | 9.9 MB 00:01 ETA
(31/31): binutils-2. 84% [================- ] 2.2 MB/s | 11 MB 00:00 ETA
(31/31): binutils-2. 91% [================== ] 2.2 MB/s | 12 MB 00:00 ETA
(31/31): binutils-2. 98% [===================-] 2.3 MB/s | 12 MB 00:00 ETA
(31/31): binutils-2.30-1.fc28.riscv64.rpm 1.5 MB/s | 6.9 MB 00:04
--------------------------------------------------------------------------------
Total 1.7 MB/s | 13 MB 00:07
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [=== ] 1/1
Preparing : [==== ] 1/1
Preparing : [====== ] 1/1
Preparing : [======== ] 1/1
Preparing : [========= ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================= ] 1/1
Preparing : [=================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================== ] 1/1
Preparing : [========================== ] 1/1
Preparing : [=========================== ] 1/1
Preparing : [============================= ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================ ] 1/1
Preparing : [================================== ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [======================================= ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================= ] 1/1
Preparing : [=============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : 1/1
Installing : file-5.32-3.fc28.riscv64 [ ] 1/31
Installing : file-5.32-3.fc28.riscv64 [====== ] 1/31
Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/31
Installing : file-5.32-3.fc28.riscv64 [================== ] 1/31
Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/31
Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/31
Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/31
Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/31
Installing : file-5.32-3.fc28.riscv64 1/31
Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/31
Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/31
Installing : unzip-6.0-36.fc28.riscv64 2/31
Installing : zip-3.0-20.fc28.riscv64 [ ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/31
Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/31
Installing : zip-3.0-20.fc28.riscv64 3/31
Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/31
Installing : dwz-0.12-5.fc28.riscv64 4/31
Installing : python-srpm-macros-3-26. [ ] 5/31
Installing : python-srpm-macros-3-26. [======================= ] 5/31
Installing : python-srpm-macros-3-26.fc28.noarch 5/31
Installing : perl-srpm-macros-1-26.fc [ ] 6/31
Installing : perl-srpm-macros-1-26.fc [====================== ] 6/31
Installing : perl-srpm-macros-1-26.fc28.noarch 6/31
Installing : go-srpm-macros-2-11.fc28 [ ] 7/31
Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/31
Installing : go-srpm-macros-2-11.fc28.noarch 7/31
Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/31
Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/31
Installing : gnat-srpm-macros-4-5.fc28.noarch 8/31
Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/31
Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/31
Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/31
Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/31
Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/31
Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/31
Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/31
Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/31
Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/31
Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/31
Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/31
Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/31
Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/31
Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/31
Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/31
Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/31
Installing : pkgconf-1.4.1-1.fc27.riscv64 12/31
Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/31
Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/31
Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/31
Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/31
Installing : pkgconf-pkg-config-1.4.1 [ ] 14/31
Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/31
Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/31
Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/31
Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/31
Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/31
Installing : binutils-2.30-1.fc28.ris [ ] 15/31
Installing : binutils-2.30-1.fc28.ris [= ] 15/31
Installing : binutils-2.30-1.fc28.ris [== ] 15/31
Installing : binutils-2.30-1.fc28.ris [=== ] 15/31
Installing : binutils-2.30-1.fc28.ris [==== ] 15/31
Installing : binutils-2.30-1.fc28.ris [===== ] 15/31
Installing : binutils-2.30-1.fc28.ris [====== ] 15/31
Installing : binutils-2.30-1.fc28.ris [======= ] 15/31
Installing : binutils-2.30-1.fc28.ris [======== ] 15/31
Installing : binutils-2.30-1.fc28.ris [========= ] 15/31
Installing : binutils-2.30-1.fc28.ris [========== ] 15/31
Installing : binutils-2.30-1.fc28.ris [=========== ] 15/31
Installing : binutils-2.30-1.fc28.ris [============ ] 15/31
Installing : binutils-2.30-1.fc28.ris [============= ] 15/31
Installing : binutils-2.30-1.fc28.ris [============== ] 15/31
Installing : binutils-2.30-1.fc28.ris [=============== ] 15/31
Installing : binutils-2.30-1.fc28.ris [================ ] 15/31
Installing : binutils-2.30-1.fc28.ris [================= ] 15/31random: crng init done
Installing : binutils-2.30-1.fc28.ris [================== ] 15/31
Installing : binutils-2.30-1.fc28.ris [=================== ] 15/31
Installing : binutils-2.30-1.fc28.ris [==================== ] 15/31
Installing : binutils-2.30-1.fc28.ris [===================== ] 15/31
Installing : binutils-2.30-1.fc28.ris [====================== ] 15/31
Installing : binutils-2.30-1.fc28.ris [======================= ] 15/31
Installing : binutils-2.30-1.fc28.ris [======================== ] 15/31
Installing : binutils-2.30-1.fc28.riscv64 15/31
Running scriptlet: binutils-2.30-1.fc28.riscv64 15/31
Installing : elfutils-0.170-4.fc28.ri [ ] 16/31
Installing : elfutils-0.170-4.fc28.ri [= ] 16/31
Installing : elfutils-0.170-4.fc28.ri [== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [=== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [==== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [===== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [====== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [======= ] 16/31
Installing : elfutils-0.170-4.fc28.ri [======== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [========= ] 16/31
Installing : elfutils-0.170-4.fc28.ri [========== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [=========== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [============ ] 16/31
Installing : elfutils-0.170-4.fc28.ri [============= ] 16/31
Installing : elfutils-0.170-4.fc28.ri [============== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [=============== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [================ ] 16/31
Installing : elfutils-0.170-4.fc28.ri [================= ] 16/31
Installing : elfutils-0.170-4.fc28.ri [================== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [=================== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [==================== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [===================== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [====================== ] 16/31
Installing : elfutils-0.170-4.fc28.ri [======================= ] 16/31
Installing : elfutils-0.170-4.fc28.ri [======================== ] 16/31
Installing : elfutils-0.170-4.fc28.riscv64 16/31
Installing : bzip2-1.0.6-24.fc28.risc [ ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [===== ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [========== ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [============== ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 17/31
Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 17/31
Installing : bzip2-1.0.6-24.fc28.riscv64 17/31
Installing : xz-5.2.3-5.fc28.riscv64 [ ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [= ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 18/31
Installing : xz-5.2.3-5.fc28.riscv64 18/31
Installing : patch-2.7.5-6.fc27.riscv [ ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [= ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [=== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [==== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [===== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [====== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [======= ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [======== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [========= ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [========== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [=========== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [============ ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [============= ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [============== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [=============== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [================ ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [================= ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [================== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [=================== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [==================== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [===================== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [====================== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [======================= ] 19/31
Installing : patch-2.7.5-6.fc27.riscv [======================== ] 19/31
Installing : patch-2.7.5-6.fc27.riscv64 19/31
Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 20/31
Installing : zstd-1.3.3-1.fc27.riscv64 20/31
Installing : rust-srpm-macros-5-1.fc2 [ ] 21/31
Installing : rust-srpm-macros-5-1.fc2 [=== ] 21/31
Installing : rust-srpm-macros-5-1.fc2 [===== ] 21/31
Installing : rust-srpm-macros-5-1.fc2 [======================= ] 21/31
Installing : rust-srpm-macros-5-1.fc28.noarch 21/31
Installing : qt5-srpm-macros-5.10.0-1 [ ] 22/31
Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 22/31
Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 22/31
Installing : openblas-srpm-macros-2-2 [ ] 23/31
Installing : openblas-srpm-macros-2-2 [================ ] 23/31
Installing : openblas-srpm-macros-2-2.fc27.noarch 23/31
Installing : ocaml-srpm-macros-5-2.fc [ ] 24/31
Installing : ocaml-srpm-macros-5-2.fc [===================== ] 24/31
Installing : ocaml-srpm-macros-5-2.fc27.noarch 24/31
Installing : nim-srpm-macros-1-1.fc28 [ ] 25/31
Installing : nim-srpm-macros-1-1.fc28 [=== ] 25/31
Installing : nim-srpm-macros-1-1.fc28 [===== ] 25/31
Installing : nim-srpm-macros-1-1.fc28 [======================= ] 25/31
Installing : nim-srpm-macros-1-1.fc28.noarch 25/31
Installing : redhat-rpm-config-96-1.f [ ] 26/31
Installing : redhat-rpm-config-96-1.f [== ] 26/31
Installing : redhat-rpm-config-96-1.f [=== ] 26/31
Installing : redhat-rpm-config-96-1.f [========= ] 26/31
Installing : redhat-rpm-config-96-1.f [=========== ] 26/31
Installing : redhat-rpm-config-96-1.f [================= ] 26/31
Installing : redhat-rpm-config-96-1.f [================== ] 26/31
Installing : redhat-rpm-config-96-1.f [=================== ] 26/31
Installing : redhat-rpm-config-96-1.f [===================== ] 26/31
Installing : redhat-rpm-config-96-1.f [====================== ] 26/31
Installing : redhat-rpm-config-96-1.f [======================== ] 26/31
Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 26/31
Installing : diffutils-3.6-3.fc28.ris [ ] 27/31
Installing : diffutils-3.6-3.fc28.ris [= ] 27/31
Installing : diffutils-3.6-3.fc28.ris [== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [=== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [==== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [===== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [====== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [======= ] 27/31
Installing : diffutils-3.6-3.fc28.ris [======== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [========= ] 27/31
Installing : diffutils-3.6-3.fc28.ris [========== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [=========== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [============ ] 27/31
Installing : diffutils-3.6-3.fc28.ris [============= ] 27/31
Installing : diffutils-3.6-3.fc28.ris [============== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [=============== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [================ ] 27/31
Installing : diffutils-3.6-3.fc28.ris [================= ] 27/31
Installing : diffutils-3.6-3.fc28.ris [================== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [=================== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [==================== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [===================== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [====================== ] 27/31
Installing : diffutils-3.6-3.fc28.ris [======================= ] 27/31
Installing : diffutils-3.6-3.fc28.ris [======================== ] 27/31
Installing : diffutils-3.6-3.fc28.riscv64 27/31
Running scriptlet: diffutils-3.6-3.fc28.riscv64 27/31
Installing : tar-2:1.29-7.fc27.riscv6 [ ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [= ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 28/31
Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 28/31
Installing : tar-2:1.29-7.fc27.riscv64 28/31
Running scriptlet: tar-2:1.29-7.fc27.riscv64 28/31
Installing : rpm-build-4.14.1-6.fc28. [ ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [= ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [=== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [==== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [===== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [====== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [======= ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [======== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [========= ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [=========== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [============ ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [============== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [=============== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [================ ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [================= ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [================== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [=================== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [==================== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [===================== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [====================== ] 29/31
Installing : rpm-build-4.14.1-6.fc28. [======================== ] 29/31
Installing : rpm-build-4.14.1-6.fc28.1.riscv64 29/31
Installing : which-2.21-4.fc28.riscv6 [ ] 30/31
Installing : which-2.21-4.fc28.riscv6 [===== ] 30/31
Installing : which-2.21-4.fc28.riscv6 [=========== ] 30/31
Installing : which-2.21-4.fc28.riscv6 [=============== ] 30/31
Installing : which-2.21-4.fc28.riscv6 [================ ] 30/31
Installing : which-2.21-4.fc28.riscv6 [================= ] 30/31
Installing : which-2.21-4.fc28.riscv6 [================== ] 30/31
Installing : which-2.21-4.fc28.riscv6 [======================== ] 30/31
Installing : which-2.21-4.fc28.riscv64 30/31
Running scriptlet: which-2.21-4.fc28.riscv64 30/31
Installing : make-1:4.2.1-6.fc27.risc [ ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [= ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [=== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [==== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [===== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [====== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [======= ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [======== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [========= ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [========== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [=========== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [============ ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [============= ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [============== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [=============== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [================ ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [================= ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [================== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [=================== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [==================== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [===================== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [====================== ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [======================= ] 31/31
Installing : make-1:4.2.1-6.fc27.risc [======================== ] 31/31
Installing : make-1:4.2.1-6.fc27.riscv64 31/31
Running scriptlet: make-1:4.2.1-6.fc27.riscv64 31/31
Verifying : tar-2:1.29-7.fc27.riscv64 1/31
Verifying : diffutils-3.6-3.fc28.riscv64 2/31
Verifying : make-1:4.2.1-6.fc27.riscv64 3/31
Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/31
Verifying : nim-srpm-macros-1-1.fc28.noarch 5/31
Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/31
Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/31
Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/31
Verifying : rust-srpm-macros-5-1.fc28.noarch 9/31
Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/31
Verifying : zstd-1.3.3-1.fc27.riscv64 11/31
Verifying : which-2.21-4.fc28.riscv64 12/31
Verifying : patch-2.7.5-6.fc27.riscv64 13/31
Verifying : unzip-6.0-36.fc28.riscv64 14/31
Verifying : xz-5.2.3-5.fc28.riscv64 15/31
Verifying : bzip2-1.0.6-24.fc28.riscv64 16/31
Verifying : elfutils-0.170-4.fc28.riscv64 17/31
Verifying : file-5.32-3.fc28.riscv64 18/31
Verifying : binutils-2.30-1.fc28.riscv64 19/31
Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 20/31
Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 21/31
Verifying : pkgconf-1.4.1-1.fc27.riscv64 22/31
Verifying : libpkgconf-1.4.1-1.fc27.riscv64 23/31
Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 24/31
Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 25/31
Verifying : gnat-srpm-macros-4-5.fc28.noarch 26/31
Verifying : go-srpm-macros-2-11.fc28.noarch 27/31
Verifying : perl-srpm-macros-1-26.fc28.noarch 28/31
Verifying : python-srpm-macros-3-26.fc28.noarch 29/31
Verifying : dwz-0.12-5.fc28.riscv64 30/31
Verifying : zip-3.0-20.fc28.riscv64 31/31
Installed:
bzip2.riscv64 1.0.6-24.fc28
diffutils.riscv64 3.6-3.fc28
make.riscv64 1:4.2.1-6.fc27
patch.riscv64 2.7.5-6.fc27
redhat-rpm-config.noarch 96-1.fc28.0.riscv64
rpm-build.riscv64 4.14.1-6.fc28.1
tar.riscv64 2:1.29-7.fc27
unzip.riscv64 6.0-36.fc28
which.riscv64 2.21-4.fc28
xz.riscv64 5.2.3-5.fc28
binutils.riscv64 2.30-1.fc28
dwz.riscv64 0.12-5.fc28
elfutils.riscv64 0.170-4.fc28
file.riscv64 5.32-3.fc28
fpc-srpm-macros.noarch 1.1-4.fc28
ghc-srpm-macros.noarch 1.4.2-7.fc28
gnat-srpm-macros.noarch 4-5.fc28
go-srpm-macros.noarch 2-11.fc28
libpkgconf.riscv64 1.4.1-1.fc27
nim-srpm-macros.noarch 1-1.fc28
ocaml-srpm-macros.noarch 5-2.fc27
openblas-srpm-macros.noarch 2-2.fc27
perl-srpm-macros.noarch 1-26.fc28
pkgconf.riscv64 1.4.1-1.fc27
pkgconf-m4.noarch 1.4.1-1.fc27
pkgconf-pkg-config.riscv64 1.4.1-1.fc27
python-srpm-macros.noarch 3-26.fc28
qt5-srpm-macros.noarch 5.10.0-1.fc28
rust-srpm-macros.noarch 5-1.fc28
zip.riscv64 3.0-20.fc28
zstd.riscv64 1.3.3-1.fc27
Complete!
+ dnf -y install hack-gcc glibc-devel
Last metadata expiration check: 0:04:19 ago on Thu Feb 22 04:18:36 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
glibc-devel riscv64 2.27-4.fc28 local 1.0 M
Installing dependencies:
glibc-headers riscv64 2.27-4.fc28 local 442 k
kernel-headers noarch 4.15.0-1.fc27 local 1.1 M
libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k
Transaction Summary
================================================================================
Install 4 Packages
Total download size: 2.5 M
Installed size: 7.1 M
Downloading Packages:
(1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA
(1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 459 kB/s | 15 kB 00:00
(2-3/4): glibc-devel 1% [ ] 522 kB/s | 46 kB 00:04 ETA
(2-4/4): kernel-head 34% [======- ] 660 kB/s | 894 kB 00:02 ETA
(2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 783 kB/s | 442 kB 00:00
(3-4/4): glibc-devel 52% [========== ] 721 kB/s | 1.3 MB 00:01 ETA
(3-4/4): glibc-devel 85% [================= ] 847 kB/s | 2.1 MB 00:00 ETA
(3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 909 kB/s | 1.0 MB 00:01
(4/4): kernel-header 95% [=================== ] 866 kB/s | 2.4 MB 00:00 ETA
(4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 942 kB/s | 1.1 MB 00:01
--------------------------------------------------------------------------------
Total 1.8 MB/s | 2.5 MB 00:01
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [============ ] 1/1
Preparing : [========================= ] 1/1
Preparing : [====================================== ] 1/1
Preparing : 1/1
Installing : kernel-headers-4.15.0-1.f [ ] 1/4
Installing : kernel-headers-4.15.0-1.f [= ] 1/4
Installing : kernel-headers-4.15.0-1.f [== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========= ] 1/4
Installing : kernel-headers-4.15.0-1.f [========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [============ ] 1/4
Installing : kernel-headers-4.15.0-1.f [============= ] 1/4
Installing : kernel-headers-4.15.0-1.f [============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [================ ] 1/4
Installing : kernel-headers-4.15.0-1.f [================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4
Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4
Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : glibc-headers-2.27-4.fc28 [ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4
Installing : glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.riscv64 4/4
Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4
Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4
Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4
Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4
Installed:
glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28
kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28
Complete!
+ touch /rootok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off