+ exec
+ rm -rf /rpmbuild
+ mkdir -p /rpmbuild
+ su -c 'rpmbuild -ba /builddir/build/SPECS/perl-GSSAPI.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DnNYPf
+ umask 022
+ cd /builddir/build/BUILD
+ cd /builddir/build/BUILD
+ rm -rf GSSAPI-0.28
+ /usr/bin/gzip -dc /builddir/build/SOURCES/GSSAPI-0.28.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd GSSAPI-0.28
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ chmod -c a-x examples/getcred_hostbased.pl examples/gss-client.pl examples/gss-server.pl
mode of 'examples/getcred_hostbased.pl' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--)
mode of 'examples/gss-client.pl' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--)
mode of 'examples/gss-server.pl' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--)
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.NLg9r1
+ umask 022
+ cd /builddir/build/BUILD
+ cd GSSAPI-0.28
+ perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 '
Welcome to GSSAPI.pm setup!
(Makefile.PL Version 0.03)
run "perl Makefile.PL --help" to see further installation options
----------------------------------------------------------
Searching krb5-config command...
using krb5-config command '/usr/bin/krb5-config'.
----------------------------------------------------------
using GSSAPI implementation
Kerberos 5 release 1.16
Warning: prerequisite Test::More 0 not found.
----------------------------------------------------------
Using LIBS
-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err
----------------------------------------------------------
Using INC includeconfiguration
----------------------------------------------------------
Checking if your kit is complete...
Looks good
Invalid LICENSE value 'perl' ignored
Generating a Unix-style Makefile
Writing Makefile for GSSAPI
Writing MYMETA.yml and MYMETA.json
+ make -j4
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/builddir/build/BUILD/GSSAPI-0.28/typemap' GSSAPI.xs > GSSAPI.xsc
Running Mkbootstrap for GSSAPI ()
chmod 644 "GSSAPI.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- GSSAPI.bs blib/arch/auto/GSSAPI/GSSAPI.bs 644
cp GSSAPI/OID.pm blib/lib/GSSAPI/OID.pm
cp GSSAPI.pm blib/lib/GSSAPI.pm
cp GSSAPI/OID/Set.pm blib/lib/GSSAPI/OID/Set.pm
cp GSSAPI/Status.pm blib/lib/GSSAPI/Status.pm
mv GSSAPI.xsc GSSAPI.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -DVERSION=\"0.28\" -DXS_VERSION=\"0.28\" -fPIC "-I/usr/lib64/perl5/CORE" GSSAPI.c
GSSAPI.c: In function 'XS_GSSAPI__Status_new':
GSSAPI.c:444:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__Name_new':
GSSAPI.c:722:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__Name_import':
GSSAPI.c:779:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__OID_new':
GSSAPI.c:1113:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__OID_from_str':
GSSAPI.c:1183:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__OID__Set_new':
GSSAPI.c:1642:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__Binding_new':
GSSAPI.c:2299:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__Context_new':
GSSAPI.c:2688:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
GSSAPI.c: In function 'XS_GSSAPI__Context_import':
GSSAPI.c:3519:9: warning: unused variable 'class' [-Wunused-variable]
char * class = (char *)SvPV_nolen(ST(0))
^~~~~
rm -f blib/arch/auto/GSSAPI/GSSAPI.so
gcc -lpthread -shared -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong GSSAPI.o -o blib/arch/auto/GSSAPI/GSSAPI.so \
-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lperl \
chmod 755 blib/arch/auto/GSSAPI/GSSAPI.so
Manifying 4 pod documents
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.diJETx
+ umask 022
+ cd /builddir/build/BUILD
+ '[' /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64 '!=' / ']'
+ rm -rf /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64
++ dirname /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64
+ mkdir -p /builddir/build/BUILDROOT
+ mkdir /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64
+ cd GSSAPI-0.28
+ make pure_install DESTDIR=/builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- GSSAPI.bs blib/arch/auto/GSSAPI/GSSAPI.bs 644
Manifying 4 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/lib64/perl5/vendor_perl/auto/GSSAPI/GSSAPI.so
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/lib64/perl5/vendor_perl/GSSAPI.pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/lib64/perl5/vendor_perl/GSSAPI/OID.pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/lib64/perl5/vendor_perl/GSSAPI/Status.pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/lib64/perl5/vendor_perl/GSSAPI/OID/Set.pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/man/man3/GSSAPI::OID::Set.3pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/man/man3/GSSAPI::OID.3pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/man/man3/GSSAPI::Status.3pm
Installing /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/man/man3/GSSAPI.3pm
+ find /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64 -type f -name .packlist -exec rm -f '{}' ';'
+ find /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64 -type f -name '*.bs' -empty -exec rm -f '{}' ';'
+ find /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64 -depth -type d -exec rmdir '{}' ';'
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Processing files: perl-GSSAPI-0.28-21.fc28.riscv64
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.MlDoEB
+ umask 022
+ cd /builddir/build/BUILD
+ cd GSSAPI-0.28
+ DOCDIR=/builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/doc/perl-GSSAPI
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/doc/perl-GSSAPI
+ cp -pr Changes /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/doc/perl-GSSAPI
+ cp -pr README /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/doc/perl-GSSAPI
+ cp -pr examples/ /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64/usr/share/doc/perl-GSSAPI
+ exit 0
Provides: perl(GSSAPI) = 0.28 perl(GSSAPI::OID) perl(GSSAPI::OID::Set) perl(GSSAPI::Status) perl-GSSAPI = 0.28-21.fc28 perl-GSSAPI(riscv-64) = 0.28-21.fc28
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libcom_err.so.2()(64bit) libgssapi_krb5.so.2()(64bit) libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit) libk5crypto.so.3()(64bit) libkrb5.so.3()(64bit) libperl.so.5.26()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) perl(:VERSION) >= 5.5.0 perl(Carp) perl(Exporter) perl(XSLoader) perl(constant) perl(overload) perl(strict) perl(warnings) rtld(GNU_HASH)
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64
Wrote: /builddir/build/SRPMS/perl-GSSAPI-0.28-21.fc28.src.rpm
Wrote: /builddir/build/RPMS/riscv64/perl-GSSAPI-0.28-21.fc28.riscv64.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6h9ocB
+ umask 022
+ cd /builddir/build/BUILD
+ cd GSSAPI-0.28
+ /usr/bin/rm -rf /builddir/build/BUILDROOT/perl-GSSAPI-0.28-21.fc28.riscv64
+ exit 0
+ touch /buildok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ poweroff
Terminated
++ cleanup
++ set +e
++ sync
Terminated
+++ cleanup
+++ set +e
+++ sync
+++ sleep 5
+++ sync
+++ poweroff